LP570 7" LED Driving Light Kit, SAE Compliant PIAA LP570 LED driving lights feature exclusive reflector-facing LED bulbs and a geometrically-perfect reflector to provide precise beam control and increased output compared with ordinary halogen bulbs.

KeepRightsign

Twin rear channels mean the sign face can be clamped in place and will not twist once secured. The clamps are available to supply separately and are not included with the sign face.

RF Series 3" LED Cube Light Driving Beam Kit, SAE Compliant The RF3 3” LED Cube light has redefined the small LED light market. Not only is the RF3 a compact housing with a multitude of mounting options, it also has more effective light output then any other forward facing cube light on the market thanks to our Reflector Facing Technology (RFT). PIAA’s advanced Reflector Facing Technology (RFT) PIAA wanted to perfect LED lighting when we designed rearward-facing bulbs and new...

LP530 3.5" LED Fog Light Kit, SAE Compliant The new PIAA LED (Light Emitting Diode) Fog light kit offers the beam control of a halogen light with the low power consumption and durability of an LED light. As a light source LED's offer several advantages over their halogen counterparts including very low power consumption, compact size and durability. Unlike most LED lights currently on the market that position the LED aimed straight out forward the LP530 Lights aim the LEDs at the reflector....

This post mounted keep left road sign is mentioned in the TSRGD guidelines as diagram 610. It is used to inform traffic that traffic must pass the sign on the side indicated. There are several common sites where these keep left signs are used, these include the exits of roundabouts and on traffic islands and junctions. This sign can be used with a 608 sign when used on a dual carriageway.

PIAA light kits are easy to install with the supplied wire harness and switch. We also offer a variety of mounting options to be sure you can make it easier for oncoming traffic to see you during the day and provide more illumination at night allowing you to see better and be safer.

Keep left signMeaning

RF Series 6" LED Light Bar Hybrid Beam Kit The PIAA RF6 six inch LED light bar features Reflector-facing LEDs that project off of an ingenious computer-designed multi-surface reflector offering more illumination than forward facing LED lights. The RF6 kit includes one light, mounting brackets, and complete wiring harness and detailed installation instructions. Bulb Type: Two 8-watt LED bulbs, with 6000K color temperature for a pure white output. The low profile design is made up of a cast...

Hybrid / ATP lamps were engineered to give drivers the best combination of beam spread, height, and distance for a variety of uses. Longer range than Fog Lamps and wider than Driving Lamps, the Hybrid / ATP is the ultimate combination for drivers in need of a versatile lamp.

Fog or Foul Weather Lamps compliment your vehicle's low beams for improved visibility in rain, fog, or snow. The distance of illumination is similar to your low beams but are significantly wider to bring road and trail shoulders into view. Fog lamps are available in white and amber colors.

can you do a u turn at akeep left sign

The backing of the sign is made from a rigid plastic sandwiched between two skins of aluminium making the sign strong and very durable. As there is no steel it will not rust giving a great lifespan.

What is a slip lane in Australia

This sign is supplied CE marked and is made from road grade materials, it has a long lifespan and will stand the test of time.

RF Series 3" LED Cube Light Flood Beam Kit The PIAA RF3 3" LED Cube light features Reflector-facing LEDs that project off of an ingenious computer-designed multi-surface reflector offering more illumination than forward facing LED Lights. The RF3 kit includes two lights, mounting brackets, and complete wiring harness and detailed installation instructions. Bulb Type: Two 8-watt LED bulbs, with 6000K Color temperature for a pure white output. The low profile design is made up of a cast aluminum...

Slip lane rules NSW

LP530 3.5" LED Driving Light Kit The new PIAA LED (Light Emitting Diode) Driving light kit offers the beam control of a halogen light with the low power consumption and durability of an LED light. As a light source LED's offer several advantages over their halogen counterparts including very low power consumption, compact size and durability. Unlike most LED lights currently on the market that position the LED aimed straight out forward the LP530 Lights aim the LEDs at the reflector. This new...

LP270 2.75" LED Fog Light Kit, SAE Compliant The new PIAA LP270 LED Fog light offers the beam control of a halogen light with the low power consumption and durability of an LED light. As a light source LED's offer several advantages over their halogen counterparts including very low power consumption, compact size and durability. Unlike most LED lights currently on the market that position the LED aimed straight out forward the LP270 Lights aim the LEDs at the reflector. This new orientation...

RF Series 6" LED Light Bar Driving Beam Kit, SAE Compliant The PIAA RF6 six inch LED light bar features Reflector-facing LEDs that project off of an ingenious computer-designed multi-surface reflector offering more illumination than forward facing LED lights. The RF6 kit includes one light, mounting brackets, and complete wiring harness and detailed installation instructions. Bulb Type: Two 8-watt LED bulbs, with 6000K color temperature for a pure white output. The low profile design is made...

© Start Traffic Ltd trading as Start Safety 2009 - 2024Registered in England with company number 6896587 and VAT registration number GB 970779374.

There are several different sizes of this sign available, which one you require will depend on the application. When used offroad in a public car park sizing restrictions are relaxed. For “on road” use the official Chapter 3 guidelines should be followed.

Driving Lamps are designed to outshine the range and brightness of your vehicle's high beams. They are especially useful at higher cruising speeds where they help to identify hazards and signs long before they would be seen with high beams only. All Driving Lamps are extremely bright and must be dimmed in situations where you would not use your high beams.

Keep left signmeaning Australia

This sign is made from a durable composite backing material with channels fixed ready for post mounting. To mount this sign you will require two additional post clamps that are available separately. The reflectivity of this sign is grade R2 (was RA2) class 2.

Flood / Backup Lamps offer wide, short distance light output that makes them a very versatile light. Mount them to the rear of your vehicle and pair with a backup harness so they switch on as you shift into reverse. Great as a Backup Light, Utility Light, or Work Light.

If you have any questions about our range of permanent road signs, reach out to our helpful sales team on +44 (0)1905 794875.

LP550 5" LED Driving Light Kit, SAE Compliant Need longer range? The PIAA 550 five inch LED Long Range driving lights feature Reflector-facing LEDs that project off of an ingenious computer-designed multi-surface reflector. Offering more and better illumination than halogen lights with the durability and low power draw of LED lighting. Kit includes two lights mounting brackets complete wiring harness and detailed installation instructions. Poly-carbonate and cast aluminum housing with...

Keep left signbunnings

R2 (RA2) Reflectivity makes this sign suitable for use with vehicles and reflects around 32% of the light that hits the surface back to the driver. This material is also called HIP which stands for high intensity prismatic.

Can you turn right at a 'keepleft sign

LP560 6" LED Driving Light Kit, SAE Compliant Need longer range? The PIAA 560 six inch LED Long Range driving lights. Reflector-facing LEDs project off of an ingenious computer-designed multi-surface reflector offering more and better illumination than halogen lights with the durability and low power draw of LED lighting. Kit includes two lights mounting brackets complete wiring harness and detailed installation instructions. Poly-carbonate and cast aluminum housing with poly-carbonate lens....

RF Series 6" LED Light Bar Fog Beam KitThe PIAA RF6 six inch LED light bar features Reflector-facing LEDs that project off of an ingenious computer-designed multi-surface reflector offering more illumination than forward facing LED lights. The RF6 kit includes one light, mounting brackets, and complete wiring harness and detailed installation instructions. Bulb Type: Two 8-watt LED bulbs, with 6000K color temperature for a pure white output. The low profile design is made up of a cast aluminum...

LP270 2.75" LED Driving Light Kit, SAE Compliant The new PIAA LP270 LED Driving light kit offers the beam control of a halogen light with the low power consumption and durability of an LED light. As a light source LED's offer several advantages over their halogen counterparts including very low power consumption, compact size and durability. Unlike most LED lights currently on the market that position the LED aimed straight out forward, the LP270 Lights aim the LEDs at the reflector. This new...

PIAA offers a variety of light kits for your bike. Whether you are an Adventure rider, a hardcore off roader, and put in the seat time Touring the backroads, you are sure to find a lamp kit that has the right beam pattern and size for your machine.