2) Sometimes the wire gets short, in that case, you have to extend it a bit. The length is increased to the extent it reaches the battery. Also, You need not worry about extending the wires. The kit (hardware) kit has the extension of wire in case the need be.

This aspect has already been discussed in the above step. Again you need to ensure that the power of the vehicle is off.

The purpose of these lights is to lighten the road ahead. The spotlights and headlights do illuminate the streets. Rock lights, on the other hand, lighten the tiny details on road.

Guests can dine at Foodoomooloo Turkish Street Food, serving Turkish dishes, or at Aki's Indian Restaurant, located approximately 5 minutes' walk away.

4) Put the module box slightly close to the battery. Make sure to keep it at a distance from the engine, so it doesn’t cause any injury. You need to ensure the dryness of the site at all times. For improved reception, keep the antenna close to the module box.

Since you are done with the work, it’s time to close the hood of the vehicle. Go for the test drive and check the working of the rock LED lights. You can easily move off-road with these rock lights.

When you drive the vehicle, the engine, as well as other metal parts, becomes hot. It is better to cool the engine down completely before planning for any work.

So whatever place you choose, it should attach the bracket strongly. Secondly, determine the purpose of getting rock LED lights.

Also, the battery is disconnected because you will be very close to the vehicle. While working with wires and batteries make sure to stay safe from probable injury or accident.

3) For connection, tick the red wire to the positive terminal of the battery. And either ground the black wire or connect with the negative terminal. In case there are some optional wires as well, Check the manual for a better understanding.

This step is about reconnecting the battery and the power. After the successful working of the rock lights, connect the battery and power back to the engine.

The most essential point is the selection of a spacious and dry space for the vehicle. Rest, all the required instruments and hardware are available with the kit. You probably would not need any additional material for an installation.

Also, the area and site have to be dry, because you will be dealing with electrical components. Also, you need proper lights for active working underneath the vehicle.

Add:No.202, Floor 2, Building D, Yisong Ecological Science Park, No.9 Jiejiabao Road, Shiyan, Bao'an District, Shenzhen, 518108, China .

Shenzhen Jinfengchi Technology Co. Ltd is an intelligent vehicle lighting manufacturer with a strong focus on R&D. We've won the national high-tech certification by the end of 2020. So far, we have customized more than 100 products for customers and obtained DOT certification. Continuously creating value beyond expectations for customers and achieving win-win is our goal.

Keeping the above point in mind, Once done with drilling it’s time to screw the lights. First, attach the Rock lights in their proper place and screw them firmly.

The driver enjoys these installation steps due to the ease involved in each process. It also involves the addition of visual aid to the vehicle as well.

This way driver is able to notice any debris or obstacle on the road. It also protects vehicles from getting hit by any rock on the road.

While taking the wire battery, you have to be careful. It should not get into the path of any moving or essential part of the vehicle.

For firm adjustment, select the area that can be drilled and mounted firmly. The placement could be underside, underneath, in front, or in the rare position of the truck.

While buying rock LED lights, make sure to get a kit that is weather resistant. The installation is for the long term, thus the kit has to be strong and resistant. In case you plan to drive off-road, the parts have to be properly intact.

1) You should keep the connection between the light and cable safe. For that matter make sure to zip the wire. It is done at every 12 inches of the strip of rock light.

Now it’s time to determine the right position of the rock lights. For that matter, you should exactly know the right position of the wheels.

The placement of the best RGB LED rock lights is different in trucks and Jeeps. There are the following steps that need to be considered when installing rock lights.

Located merely 1.4 km from the 309m-tall Sydney Tower Eye Observation Deck, the 3-star Crest Hotel Sydney is merely 5 minutes' walk from Artspace Sydney.

Please enable JavaScript in your browser to complete this form.LayoutName *Phone *Email *CountryYour message *Get Free Samples

There are mainly four parts in the rock LED Lights, each for one wheel well system. You also have the option of getting different sets for various colors.

This Sydney hotel is about 15 km from Kingsford Smith airport and nearly a 25-minute walk from such cultural venues as Sydney Harbour Bridge. The property offers proximity to such natural sights as Chinese Garden of Friendship (2.6 km) and The Domain Park (0.6 km). Powerhouse Museum is relatively near the hotel, while Kings Cross is situated nearly 10 minutes' walk away. The accommodation stands close to Art Gallery of New South Wales, about a 10-minute walk from Fitzroy Gardens Macleay St bus stop.

With each LED Rock light, you have to connect the connecting wire. Then take the cable from under the vehicle to the place where it connects to the battery.

Once you decide on the point of installation, it will be easier to get the rock lights. Even you won’t have to worry about following installation steps then.

The procedure for installing rock LED lights is pretty easy to follow. First, you have to have a good know-how of the wiring system of the lights before installation.

These additional requirements for rock LED installation is pretty easy and feasible. Since this process doesn’t ask for any additional work or tools, thus it is liked by many.

So it doesn’t come out. For better placement and strong attachment, It is better to use the available hardware. The hardware is available in the kit.

There should not be much clutter or debris on the path that you have chosen for this purpose. Your emergency brakes should be accurately working. You will be required to work on the wheel area, thus safety should be ensured.