Road closed signpictures

When you find the UN number and proper shipping name of your dangerous good using Schedule 1, if you go to column 6 (b) it will give you an EQ (Excepted Quantity) code between E0 and E5. In section 1.17.1 there is a chart with the various codes referenced that will tell you the allowable inner and outer packaging limits when shipping in Excepted Quantities referenced below:

Road ClosedAheadsign

Previously I wrote a blog on Limited quantities, titled “Shipping Limited Quantities by Ground vs Air, What’s the Difference?”

Temporaryroad Closed sign

Road closed signpng

When shipping in Excepted quantities per TDG this would exempt you from Part 3 (Documentation), Part 4 (Dangerous Goods Safety Marks), Part 5 (Means of Containment), Part 6 (Training), Part 7 (Emergency Response Assistance Plan) and Part 8 (Reporting Requirements) as long as it is marked with the Excepted Quantity marking. The dangerous goods must be in an inner means of containment and an outer means of containment that are designed, constructed, filled, closed, secured and maintained so that under normal conditions of transport, including handling, there will be no accidental release of the dangerous goods that could endanger public safety.

Limited quantities are a popular exemption when shipping dangerous goods, as mentioned in the blog above. In addition to limited quantities, one of the other more common exemptions used when shipping dangerous goods in smaller amounts is Excepted Quantities. Excepted quantities are another way of shipping small quantities of hazardous goods with less stringent regulations. In most cases, the package may be exempt from marking, UN Packaging, and Labeling requirements outlined in the various regulations. You may ask yourself, what are the rules when shipping Excepted Quantities, and are there any differences across the various regulations?

Similar to TDG, both IATA and IMDG Code have a chart that will show you the limits when shipping in Excepted Quantities. In IATA, the chart is located in Section 2.6, and you would simply look in Column F in the list of dangerous goods to determine what EQ code (E0-E5) your dangerous good falls under. And in the IMDG code, you would look in column 7(b) on the dangerous goods list to find your EQ code (E0-E5), and the chart is listed in section 3.5. An example of the chart for both regulations is below:

38271 West 12 Mile Road Farmington Hills, Michigan 48331 United States

In IATA Section 2.6, it will tell you the limitations when shipping Excepted Quantities. Generally, Excepted Quantities require no Shipper’s Declaration, UN packaging, and hazard class labeling. The Excepted Quantity package marking is required, and packaging must be triple-layered and must be capable of passing a drop and stack test. Similarly, the IMDG code also requires that packaging must be triple-layered and also must be capable of passing a drop and stack test as well; this is all mentioned in section 3.5. Hazard class labeling is not required per the IMDG code, but the Excepted Quantities mark must be on the outside of the package. The main differences here with the IMDG code is a shipping document is required with the words “dangerous goods in excepted quantities” and with the number of packages referenced. In addition, the number of packages per each cargo unit cannot exceed 1000.  If you are looking for the required Excepted Quantity marking that is compliant in all modes of transport, feel free to call us at 877-756-3718 (U.S.) or 888-977-4834 (Canada).

Road closed signprintable

Excepted Quantities is another exemption that can be used across the various dangerous goods regulations. Exemptions are basically a way the various regulations allow us to bend the rules a bit, but the key here is that they have to be in small quantities (more on that later). What each of the modes of transport have in common is that the marking below is required when shipping in Excepted Quantities instead of hazard class labeling.  The marking must contain the primary hazard class, or when assigned, the division of the material in addition to the name of the shipper or consignee if it is not anywhere else on the package. The hatching on the marking can be either black or red on a suitable contrasting background. This is just a piece of the puzzle; how do you know if you are allowed to ship dangerous goods in Excepted Quantities, and what does it exempt you from? Let’s take a look at the domestic and international regulations as it pertains to Excepted Quantities.

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

In the 49 CFR, you will find information on Excepted Quantities at 173.4A. Shipping Dangerous goods as Excepted Quantities per the 49CFR would exempt you from hazard class labeling, UN packaging, placarding, and shipping papers. Although UN packaging is not required, you must use a triple layer packaging (inner packaging, intermediate packaging with absorbent, and outer packaging), and it must be capable of passing a drop test. The inner and outer packaging limits per the 49CFR are below:

Road Closed signmeaning

Michael Zendano started with ICC Compliance Center back in 2016 with several years in the packaging field as a Quality Control Manager. In addition, he has 8 years experience in teaching. Michael works at the Niagara Falls Office as the Regulatory Packaging Expert where he manages packaging projects and procedures and is a member of the Institute of Packaging Professionals (IOPP) and The Chemical Packaging Committee (CPC) . Degrees: M.S. Science of Education.

Sign up for our Compliance Bulletin and receive the latest news on regulatory updates delivered straight to your inbox. (No junk mail, ever. We promise!)

MDI Compact® Sign is permanently mounted to a foldable crossbracing, which allows the sign to fold down and be stored as one unit with the sign stand. The crossbracing is equipped with a Single Trigger Release Mechanism for easy deployment and take down with just the push of a button. The material is Reflexite® Super Bright and is highly visible in daylight and headlights. The MDI Compact Sign is used with TrafficMaster® Sign Stand Model 3612DLK. The sign can be stored right in the stand, ready for immediate use.