4. Use Cruise Control Wisely: On long stretches of road, use cruise control to maintain a consistent speed and avoid speeding.

4. Increase Following Distance: Keep extra space between your vehicle and the one in front to react to any sudden stops.

The “Tilting Truck” sign warns drivers, especially those operating heavy vehicles, of a sharp curve ahead that could cause trucks to tip over if taken at high speed. The sign often includes a recommended speed limit.

• Text: Below the symbol, the sign indicates the word “AREA” and specifies the times when stopping is prohibited, such as “7 AM – 12 NOON” and “12 NOON – 9 PM”.

These signs indicate the beginning of a freeway or an entrance to a freeway, signalling drivers to adjust their driving to freeway conditions.

5. Check for Signs: Look for additional signage or signals that may control the intersection, such as stop signs or traffic lights.

1. Adhere to the Speed Limit: Always drive within the specified speed limit to ensure safety and compliance with traffic laws.

By simplifying the message, it reduces the risk of misinterpretation, which increases the chances of the sign’s warning or instruction being followed.

The “Wind Gust” sign warns drivers of strong wind gusts that may affect vehicle control, particularly for high-sided vehicles.

3. Stay Alert: These signs are often placed in areas with additional hazards, so maintain high awareness and follow the speed limit.

The “Give Way Sign Ahead” alerts drivers that they are approaching an intersection where they must yield the right-of-way to other vehicles.

• Restricted Areas: To prevent unauthorized vehicles from entering areas such as construction sites, military zones, or pedestrian-only zones.

This sign indicates that the road you are on will end at a “T” intersection ahead. You must prepare to turn either left or right.

2. Alternative Routes: Use alternate paths or routes if your vehicle type or if you are a pedestrian/bicyclist. Follow detour signs or use a map/GPS for guidance.

• Colour Scheme: The sign has a black truck symbol above the word “LANE” in black text on a white background, framed by a black border.

The “Hairpin Bend” sign warns drivers of a sharp turn ahead, resembling a hairpin shape, indicating a sharp curve either to the left or the right.

2. Check for Additional Restrictions: Look out for other signs that may affect parking regulations, such as no parking during street cleaning hours.

5. Signal Your Moves: Cyclists should use hand signals to indicate their intentions to turn or stop, providing clear communication to pedestrians.

The “Hazardous Road Surface Conditions Ahead” sign warns drivers of potentially slippery or dangerous road surfaces ahead, often due to weather conditions like rain, ice, or snow.

4. Follow Crossing Guards: Obey the instructions of crossing guards who are present to assist children safely across the street.

2. Check for Additional Signs: Ensure there are no other parking restrictions in the area, such as street cleaning times or temporary no-parking signs.

This sign indicates a zone where parking is restricted to vehicles that have a valid permit. The time and days during which the permit requirement is enforced are specified on the sign.

2. Be Patient: Understand that the restriction is in place for safety reasons, and look for designated passing zones if you need to overtake.

Customise this design or add your logo. You may send us your logo separately quoting your order number. We will send you a concept for your approval before we print.

1. Move to the Correct Lane Early: Ensure you are in the correct lane well before reaching the intersection if you need to go straight or left.

1. Do Not Enter: Obey the sign and do not attempt to drive past it, as this could lead to traffic violations or accidents.

The “Staggered Side Road Intersection, First From Left/Right” sign indicates that there are staggered side road intersections ahead, with the first side road appearing from the left or right, respectively.

This sign indicates that drivers must turn in the direction shown by the arrow and are not permitted to go straight ahead.

The “Low Clearance Ahead” sign alerts drivers that there is a height restriction ahead and vehicles taller than the indicated clearance height should not proceed.

This sign indicates that overtaking or passing other vehicles is prohibited in the designated area. It is used to ensure safety on roads where such manoeuvres could be particularly dangerous.

The “Stock Crossing” sign alerts drivers to the presence of livestock such as cattle and sheep that may be crossing the road.

long-term digital print laminated for long-term use. With a life of 5 years or more. We use a Hi Tac vinyl which allows it to be applied to most surfaces.

This sign indicates that the road ahead will have two-way traffic, meaning vehicles will be travelling in both directions.

The “Road Narrows” sign warns drivers that the road ahead will become narrower, indicating that there will be less room for vehicles to pass.

2. Keep Right/Left: Maintain your lane position according to the country’s driving rules (right in some countries, left in others).

2. Observe Time Restrictions: Note the times and days when the permit is required (in this case, 9 AM to 4 PM, Monday to Friday).

Hazard Signs NZ continues to deliver excellent quality signs at highly competitive prices. If you require a quote for a custom made sign or you would like to re-sell our products email us.

This sign indicates the end of a speed limit zone, allowing drivers to travel at any speed that is safe and appropriate for the conditions, within the bounds of general speed laws.

3. Use Other Lanes if Alone: If you’re driving alone, use the other lanes outside the transit lane during the restricted times.

These signs indicate restrictions on specific types of vehicles and pedestrians from entering certain areas. They are used to ensure safety, manage traffic flow, and prevent congestion in areas where these types of vehicles or pedestrians are not allowed.

This sign alerts drivers that they are travelling in the wrong direction on a road or highway and need to turn around immediately.

2. Be Patient: Understand that the restriction is in place for safety reasons, and look for designated passing zones if you need to overtake.

Prevent accidents involving highly hazardous materials like hydrochloric acid with our HAZCHEM Hydrochloric Acid Sign. Hazchem signs are required by New Zealand Law to be essentially displayed on any workplace, container or vehicle that stores certain chemical substances over a certain quantity.  The objective is to provide –

1. Reduce Speed: Approach the curve with caution and reduce your speed to ensure you can navigate both the curve and the intersection safely.

2. Turn Around Safely: Check for traffic and turn around safely, preferably at a point where you have enough visibility and space.

This sign indicates that a crossroad intersection is ahead on a curve, which could be either to the left or the right depending on the direction of the curve.

4. Look for Alternatives: If you don’t have a permit, seek alternative parking outside of the restricted zone or check if a temporary permit is available for visitors.

Hydrochloric acidformula

2. Taxi Zone: Reserved for taxis. Other vehicles should avoid stopping or parking here to keep the area clear for taxis.

This sign indicates that vehicles in the left lane must make a left turn. It is used to manage traffic flow and ensure vehicles in the left lane prepare to turn left.

The “Traffic Hazard Ahead” sign alerts drivers to potential dangers on the road ahead, such as debris, accidents, or other unexpected obstacles.

This sign indicates the end of a speed limit zone, such as 60 km/h. It informs drivers that the specific speed limit restriction has ended, and they can adjust their speed accordingly to comply with the new or general speed limits of the road.

4. Increase Following Distance: Allow more space between your vehicle and others, particularly if you are driving a heavy vehicle.

The “Workers Ahead” sign warns drivers of road workers ahead and the need to proceed with caution due to the potential presence of people and machinery on or near the road.

1. Stay Alert: Be aware of oncoming traffic and maintain a safe distance from vehicles travelling in the opposite direction.

3. Be Cautious: Even outside the specified times, consider whether stopping might still obstruct traffic or pose safety hazards.

This sign indicates a lane that is designated solely for emergency stopping. It is used to provide a safe area for vehicles to stop in case of an emergency without obstructing the flow of traffic.

3. Outside Time Limits: You may be able to park for longer periods outside of the specified hours, but always double-check for any other signs or regulations.

2. Observe Traffic: Be extra vigilant for vehicles entering or crossing the intersection, as they may be harder to see due to the curve.

3. Avoid Fines: Parking in the permit zone without a valid permit during the restricted times can result in fines or your vehicle being towed.

This sign indicates that the area beyond the sign is restricted and prohibits pedestrians, bicycles, animals, and tractors.

The “Stop Sign Ahead” sign alerts drivers to an upcoming stop sign, indicating they should prepare to come to a complete stop.

These signs indicate a railway crossing ahead. The two types shown have slightly different designs but serve the same purpose.

The “Falling Rocks” sign warns drivers that they are entering an area where rocks may fall onto the road from a cliff or steep slope.

• Colour Scheme: The sign has a black bus symbol above the word “LANE” in black text on a white background, framed by a black border.

This sign instructs drivers to yield to buses, particularly when buses are merging back into traffic from a bus stop or lane. The goal is to facilitate the smooth re-entry of buses into the flow of traffic, ensuring that public transportation operates efficiently and without unnecessary delays.

• Additional Information: At the bottom, it states “EXCEPT AS SIGNED,” indicating that there might be specific conditions or exemptions in other signs.

These signs indicate lanes or areas designated exclusively for buses and bicycles, respectively. They are used to ensure the safe and efficient flow of specific types of traffic.

3. Stay Safe: If you must stop in the emergency lane, ensure your hazard lights are on and, if safe, exit the vehicle and stand away from traffic.

5. Follow the Flow: Adhere to the sign’s instructions to maintain smooth traffic flow and avoid unnecessary lane changes.

The “Series of Curves Ahead, First to Left/Right” sign warns drivers of a series of upcoming curves in the road, with the first curve being to the left or right.

The “Double Side Road Intersection” sign warns drivers of two side roads intersecting with the main road, one after the other, from either the left or the right.

4. Do Not Swerve: If an animal is in your path, brake firmly and remain in your lane. Swerving can cause more severe accidents.

These signs are crucial for ensuring the safety of both motorists and trains, preventing collisions at railway crossings.

3. Use High Beams: When driving at night, use high beams to better illuminate the road ahead (but dim them for oncoming traffic).

This sign indicates that the freeway is ending in 1 kilometre, and drivers will soon transition to regular road conditions.

This sign indicates a path where the space is divided into separate lanes for pedestrians and cyclists, ensuring that each group has a designated area.

The “Farm Machinery Sign” alerts drivers that they are entering an area where farm machinery, such as tractors, may be crossing or driving on the road.

This sign indicates the presence of a crest in the road ahead, warning drivers to be cautious as their view of the road beyond may be obstructed.

This sign indicates the presence of a median turning lane, which allows vehicles to make left or right turns from the centre of a road. It is designed to improve traffic flow and safety by providing a designated space for turning vehicles.

This sign indicates an alphanumeric route, combining letters and numbers to designate a specific road or highway within a network.

3. Observe Local Laws: Always adhere to local parking regulations, as they may override the no-limit parking if special circumstances arise.

These signs indicate that traffic is only allowed to flow in the direction indicated by the arrow, either left or right.

The “Railway Level Crossing on Side Road” sign warns drivers of a railway crossing located on a side road, either to the left or right of the main road.

5. Safety First: Even in a transit lane, adhere to speed limits and drive safely, respecting all traffic rules and other road users.

2. Find Alternative Routes: Use other streets or paths to reach your destination. If you are unsure, follow detour signs or use a GPS for guidance.

The “Grid” sign alerts drivers that they are approaching a cattle grid, which is a device used to prevent livestock from crossing.

The “Priority Side Road Intersection from Left or Right” sign indicates that drivers on the main road have priority over vehicles entering from the side road.

This sign indicates a clearway, a section of road where stopping and parking are not allowed during specified times to ensure smooth traffic flow and prevent congestion.

This sign instructs drivers to stay in the left lane unless they are overtaking another vehicle. It is designed to ensure smooth traffic flow and reduce congestion, particularly on multi-lane roads and highways.

4. Yield Right of Way: Follow the standard rules of the road, yielding to oncoming traffic or vehicles already in the intersection.

3. Watch for Additional Signs: There may be other signs indicating the direction or path vehicles should take, so pay attention to all road signs in the area.

The “Pedestrian Crossing Ahead” sign alerts drivers that they are approaching a designated pedestrian crossing area and should be prepared to stop.

This sign indicates that overtaking or passing other vehicles is prohibited in the designated area. It is used to ensure safety on roads where such manoeuvres could be particularly dangerous.

These signs indicate a curve in the road ahead, directing drivers to slow down and be prepared to turn in the indicated direction.

The No Entry sign indicates that vehicles are not allowed to enter a particular area or road. It is used to prevent traffic from entering a prohibited zone, such as a one-way street from the wrong direction or a restricted area.

3. Respect Each Other: Both pedestrians and cyclists should be mindful of each other’s space and avoid crossing into the other lane.

2. Be Mindful of Conditions: Adjust your speed according to road, weather, and traffic conditions even if it means driving below the speed limit.

The “End Divided Road” sign informs drivers that the divided road they are on will soon end, and they will transition to an undivided road.

NZS/AS 1319:1994 advocates simplicity and clarity in safety signage. To be effective, they should be easy to read and interpret at a glance.

The “Lane Allocation Ahead” sign informs drivers about the allocation of lanes ahead, indicating the specific lanes designated for different traffic directions.

The “Narrow Bridge” sign alerts drivers that they are approaching a bridge with a width restriction and should be prepared for a narrower road.

1. Stay in Your Lane: Pedestrians should use the designated pedestrian lane, and cyclists should use the designated cycling lane.

The “Merging Traffic from Left or Right” sign alerts drivers that vehicles will be entering the main road from a side road on either the left or right side.

This sign indicates that drivers must give way to traffic already circulating within the roundabout. It ensures the smooth flow of traffic and prevents collisions within the roundabout.

The “Reverse Turn Sign, First to Left or Right” warns drivers of a reverse turn ahead, indicating a sharp change in direction.

4. Watch for Changes: Be on the lookout for signs indicating a change in the speed limit as you enter or exit different zones.

The “Side Road Intersection on a Curve to Left/Right” sign warns drivers of a side road intersecting with the main road on a curve, either to the left or right.

1. Observe Restrictions: Ensure that if you are a pedestrian, cyclist, or operating a tractor or transporting animals, you do not proceed beyond this point.

The “Exit Advisory Speed with Reverse Curve” sign indicates the recommended speed for navigating an exit ramp or turn that involves a reverse curve, starting to the left or right.

In this blog, we’ll delve into some essential road signs that you’re likely to encounter. Understanding these signs not only helps in obeying traffic laws but also enhances road safety for all users.

The “Side Road Intersection from Left or Right” sign warns drivers of a side road intersecting with the main road from either the left or the right.

There are a lot of signs and information in this list so we recommend using the search function on your phone or computer to find a specific sign. We have categorised them into 5 main categories which are:

The “Exit Advisory Speed with Curve” sign indicates the recommended speed for navigating an exit ramp or turn that involves a curve, starting to the left or right.

HAZCHEM Hydrochloric Acid Sign is used to warn people of the bulk storage of hydrochloric acid as determined in the HSNO-approved code of practice.

For further information go to the Worksafe website https://www.worksafe.govt.nz/topic-and-industry/hazardous-substances/managing/hazardous-substances-signs/

This sign indicates an area where vehicles and pedestrians share the road space, with a strict speed limit to ensure safety.

The “Warning for Animals” sign alerts drivers to the presence of wild animals that may cross the road. These signs depict specific animals common to the area, such as kangaroos, koalas, camels, emus, horses, and a general “wild animals” warning.

Firstly, the HAZCHEM Hydrochloric Acid Sign warns people of the bulk storage of dangerous goods like hydrochloric acid that can be flammable, corrosive and ecotoxic as determined in the HSNO-approved code of practice. Secondly, and most importantly, these signs help the fire brigade to determine the course of action if there’s an accident.

1. Carpool Compliance: Ensure your vehicle has at least two occupants to use the transit lane during the indicated times.

The “Traffic Signals Ahead” sign warns drivers of upcoming traffic lights, indicating they should be prepared to stop or adjust their speed accordingly.

This sign indicates the end of a speed-restricted zone. It informs drivers that they are leaving an area with a specific speed limit and can adjust their speed accordingly to comply with the general road speed limits.

These signs designate specific lanes for bicycles, buses, and trucks. They help manage traffic flow and enhance safety by separating different types of vehicles.

This sign indicates that drivers must slow down and yield the right-of-way to other vehicles or pedestrians. If necessary, drivers should stop to allow others to proceed before continuing.

The “Side Road Intersection” sign warns drivers of a side road intersecting with the main road ahead, indicating a potential merging point for vehicles.

1. Avoid Driving in These Lanes: Only drive in bus lanes if permitted (e.g., taxis or emergency vehicles may be allowed).

The “Dip” sign alerts drivers to a dip in the road ahead, which may cause vehicles to bounce or jolt if not navigated carefully.

4. Be Cautious with High-sided Vehicles: Be extra vigilant around lorries, vans, and buses, as they are more affected by wind.

The “Trucks Crossing or Entering” sign warns drivers that trucks may be crossing or entering the road ahead, requiring extra caution due to the potential presence of slow-moving or large vehicles.

These signs indicate specific areas reserved for certain types of vehicles to stop or park. Each zone is designated for the corresponding vehicle type, ensuring smooth traffic flow and efficient use of space.

• Colour Scheme: The sign has a black bicycle symbol above the word “LANE” in black text on a white background, framed by a black border.

5. Be Cautious: Exercise extra caution when overtaking, ensuring there is enough space and time to safely pass other vehicles.

The “Exit Advisory Speed with Hairpin Bend” sign indicates the recommended speed for navigating an exit ramp or turn that involves a hairpin bend, starting to the left or right.

The mission of Hazard Signs NZ is to provide quality-made safety signs to all of New Zealand. Our great prices and convenient online ordering platform make us a preferred supplier to many NZ businesses. All our signs are designed and manufactured in Invercargill to meet the workplace health and safety needs of all businesses and industries in New Zealand.

2. Observe Time Restrictions: Note the times when the transit lane rules are in effect (e.g., 6 AM – 10 AM, Monday to Friday).

3. Stay Alert: These signs are often placed in high-traffic areas; follow the regulations to avoid fines and ensure smooth traffic flow.

The “Railway Level Crossing on Road Ahead (Skewed)” sign alerts drivers that they are approaching a railway level crossing where the tracks cross the road at an angle.

The “Roadwork Ahead” sign informs drivers that roadwork is taking place ahead, and they should be prepared for changes in traffic patterns, reduced speed limits, and potential delays.

The “Roundabout Ahead” sign alerts drivers that they are approaching a roundabout and should prepare to give way to traffic already in the roundabout.

3. Plan Your Route: If you miss a turn, proceed to a location where U-turns are permitted or safely turn around using other legal manoeuvres.

5. Observe Road Signs: Pay attention to additional signage that may provide further instructions or indicate lane changes.

3. Lane Discipline: Avoid staying in the right lane if you are not overtaking, as this can cause congestion and frustrate other drivers.

This sign indicates that drivers must come to a complete stop at the intersection or junction. It is a regulatory sign that ensures safety and right-of-way.

These signs indicate areas where parking is prohibited. They can specify the times when parking is not allowed or indicate a general prohibition in the designated area.

The “Railway Level Crossing with Flashing Signals Ahead” sign warns drivers of an upcoming railway crossing that is equipped with flashing signals to indicate the approach of a train.

The “Priority Crossroad Intersection from Left or Right” sign informs drivers that the crossroad they are approaching has priority over their current road.

4. Observe Traffic Lights: If at a signalized intersection, follow the traffic lights and wait for the appropriate signal before turning.

1. Stay Alert: Watch for vehicles entering or exiting from the side road, especially on curves where visibility may be reduced.

This sign indicates that vehicles in the left lane must take the next exit. It is used to manage traffic flow, especially near exits on highways or freeways, ensuring that vehicles in the left lane prepare to exit.

The “Reverse Curve Sign, First to Left or Right” warns drivers of an upcoming series of curves, first bending to the left and then to the right (or vice versa).

5. Observe Local Laws: Be aware of specific speed limits in school zones, residential areas, and construction zones, which may differ from general road limits.

The standard states that signs must be positioned near the hazard they are warning about, which ensures that the safety message is relevant. Also, it advocates the use of contrasting colours for the background and lettering. This attention to the colour scheme will increase visibility and readability from a reasonable distance, which ensures the message is accessible.

2. Safety Compliance: These restrictions are in place for the safety of all road users. Adhere strictly to ensure safety.

3. Check Vehicle: Ensure your vehicle is in good condition to handle the grid, especially if you have a low clearance vehicle.

This sign indicates the recommended maximum speed at which drivers should exit a motorway or main road to ensure safety.

The “Staggered Side Road Junction” sign warns drivers of upcoming side roads that join the main road in a staggered manner, meaning they do not align directly opposite each other.

DON'T SEE WHAT YOU WANT? Let us know and we can design and add to our range of products. Ring us at 032182678 or Email us at sales@hazard-signs.nz Dismiss

• Text: To the right of the symbol, the sign usually indicates the specific times and days when stopping is prohibited, such as “4-6 PM MON – FRI”.

This sign indicates a transit lane, often referred to as a T2 lane, which is designated for vehicles carrying at least two occupants, including the driver, during specified times.

This unique stop sign, incorporating the image of traffic lights, is designed to alert drivers to the presence of a traffic signal ahead.

3. Observe Speed Limits: Adhere to posted speed limits and adjust your speed according to road conditions and traffic flow.

The “Divided Road” sign indicates to drivers that the road ahead will split into a divided road, typically with a central median.

These signs indicate designated areas for specific purposes, such as loading/unloading goods and construction works. They help manage road use and ensure safe and efficient operations in these areas.

This sign indicates that a crossroad intersection is ahead, where traffic can cross the main road from either direction.

The “Loose Stones or Gravel Ahead” sign warns drivers of loose stones or gravel on the road ahead, which can cause damage to vehicles and create hazardous driving conditions.

3. Stay Safe: Ensure you maintain a safe distance from buses to avoid collisions and give them enough space to maneuver.

4. Check Blind Spots: Always check your blind spots for vehicles, cyclists, or pedestrians before changing lanes or turning.

5. Follow Additional Signs: Be aware of any additional signs or signals that might further regulate traffic at the intersection.

3. Stay Alert: These signs are often placed in areas with additional hazards, so maintain high awareness and follow the speed limit.

3. Adjust for Conditions: Reduce speed further if road conditions are poor, such as during bad weather or heavy traffic.

Please note. We make some of our safety signs to order and it may take 5 to 10 business days to receive. If you require your order urgently, please don’t hesitate to contact us to confirm an estimated delivery date prior to placing your order.

2. Stay Alert: Pay close attention to the road and surrounding areas, especially at dawn and dusk when animals are most active.

3. Check for Oncoming Traffic: Be prepared to yield to vehicles already on the bridge if it is too narrow for two-way traffic.

Hydrochloric acid

Understanding Australian Road Signs can sometimes feel like deciphering a complex language. Road signs play a crucial role in guiding drivers, cyclists, and pedestrians, ensuring everyone’s safety and maintaining an orderly flow of traffic.

If you are not sure about what sign you need for your business, just contact us at +6432183350 or email us and we will make it ready for you.

3. Stay Informed: Be aware of the local regulations and restrictions that apply to specific areas to avoid entering prohibited zones.

1. Observe the Times: The speed limit is enforced during the times indicated on the sign, typically during school start and end times.

This sign indicates a school zone where a reduced speed limit is enforced during specific hours to ensure the safety of children and pedestrians.

4. Be Courteous: While there’s no time limit, consider moving your vehicle if it’s been parked for an extended period to allow others access to the space.

The “Temporary Traffic Signals Ahead” sign alerts drivers to the presence of temporary traffic signals ahead, often used to control traffic flow during road works or emergencies.

This sign indicates the maximum speed limit for a specific area. It is a regulatory sign used to enforce speed limits to enhance road safety.

The “Close Lane(s) Ahead” sign informs drivers that one or more lanes ahead are closed, typically due to construction or maintenance.

3. Truck Zone: Designated for trucks, often for loading and unloading purposes. Other vehicles should not park in these areas.

The “Staggered Side Road Intersection, First from Left/Right” sign indicates staggered side road intersections ahead, with the first side road appearing from the left or right, respectively.

2. Signal Early: Indicate your lane change well in advance.3. Merge Smoothly: Move into the open lane(s) safely and steadily.

The “Two-Way Traffic Ahead” sign warns drivers that the road ahead will switch from one-way to two-way traffic, requiring extra caution as vehicles will be coming from the opposite direction.

This sign indicates that drivers are allowed to make a left turn at a red traffic light, provided they come to a complete stop first. This rule is applicable only when the sign is posted.