Railway crossingwithout barriersign

Companies like Warning Lites or Safety Signs also own plenty of construction cones as well. These are private traffic control companies that are generally subcontracted by road construction companies in Minnesota. MnDOT generally contracts out large construction projects to private companies who then turn to traffic control companies for executing the closure plans.

A party suggesting a need for change or addition to the crossing traffic control shall contact the Public Works Director. Questions concerning the railroad crossing sign and/or flashing light signals and gates will be forwarded to the appropriate railroad. They have the responsibility to install and maintain these devices. Adjustments to the other signs and markings will be made by the Public Works Department.

Heather Brown loves to put her curiosity to work to answer your Good Questions on WCCO 4 News at 10, and helps you kick your weekdays off on WCCO This Morning and WCCO Mid-Morning.

Railroadcrossing signwith lights

Every at-grade railroad crossing of a public roadway shall have Railroad Crossing signs and markings as per guidelines established in The Minnesota Manual on Uniform Traffic Control Devices. Generally such devices consist of the following:

MINNEAPOLIS -- On Wednesday, the Minnesota Department of Transportation released its list of 2023 construction projects signaling the beginning of road construction season across the state.

Passive traffic control devices identify and direct attention to the location of a grade crossing. They permit vehicle operators and pedestrians to take appropriate action.

And, every year, WCCO viewers ask the Good Question: Where do all those orange cones go in the winter? (Thanks to Elizabeth from St. Cloud, Collin from New Brighton and Kevin from Minnetonka and many more.)

Railway crossing signdrawing

By this time next month, Donohue expects most of the traffic control equipment now sitting in its lot to be distributed along Minnesota roads as we enter road construction season.

"I think most people assume it's MnDOT or a city or county and they have their own equipment and they do their own, but for larger road construction projects, it's typically always a private company doing traffic control," said Donohue.

"The cones live everywhere, there's no one storage facility," said Jake Loesch, Director of Communications for MnDOT. "We have them all over."

Railway crossing signmeaning

Cones are stored in different places by the many entities that own them in Minnesota. MnDOT estimates they own 14,000 of them, which are stored in the garages of their more than 100 truck stations across the state. MnDOT uses them mostly to close roads or lanes for repair projects like pothole patching or guardrail maintenance. Cities and counties, who maintain up to 90% of the roadways in Minnesota, also own a fair share.

In addition to construction cones that are stored outside at Warning Lites' headquarters, they also have orange drums, pedestrian barricades, concrete barriers, flashing lights and signs that conform to MnDOT standards. They also have an area with newer, cleaner cones that are used for special events, like Vikings games or the Twin Cities Marathon.

A railroad crossing sign, commonly identified as the "crossbuck" sign, and in some cases an active traffic control system consisting of flashing light signals and gates.