7inchLEDHeadlight Motorcycle

These lights are really nice! They light up the ground around my door when I press my open doors on my Fob! The amber turn signals are awesome! These should have been a standard feature for all Jeeps!

I installed reverse lights on 2 different JLU jeeps, one using the tap connectors provided with the reverse light kit and one using this harness....this harness is definitely the way to go.

The Ultimate LED replacement headlight option for any vehicle with 7” Sealed Beam lamps. The rugged design is perfect for your Jeep Wrangler, Off-Road Vehicle, Buggies, or Classic Car/ Truck. Installation is very easy with the included H4 and H13 “Plug and Play” connectors. Each set comes in full color retail-ready packaging and a 2-Year free Replacement Warranty. You can even choose optional colored Halos for even more customization!

7inchRound LEDheadlights for classic cars

I saw these posted on a FB Jeep group page and loved the look. I have always hated the factory lights so I finally pulled the trigger and bought them and LOVE the look. I am not an electrical person and found the install very easy.

Thank you for the honest review! I have passed along your critique of the brackets to the appropriate quality control personnel.

7inchRound LEDHeadlights with turn signals

Just easy as pie. Make sure to get the kit that is plug and play so you dont have to cut into your wiring. Very bright and a great help at night. The hard part was actually just removing the left jeep tail light. Pull straight back after removing the two screws. Put some silicone grease on the grommets so next time the tail light removal will be easy. Summit Racing carries these in stock.

7inch HeadlightLED

Was going to install these into my 22 Glad with "adapter brackets" but, those did not hold the light properly in place, so I sent the brackets back and installed these into my 2012 JK replacing the older Quadratec LED's. These fit perfectly inside the housing bezel of the 2012 Jeep and are much better light then the 12 year old Quadratec ones I had. They still worked though, so no complaints about those. See if these will last 12 years though!

7InchLEDHeadlights for trucks

Really good product. Wish they had different size lengths in the colorshift to fit various cars but it worked well for various cars Ive used it on. A few weird setups to get the color right and all was perfect from there.

I just installed these and at first I was a bit hesitant as my cousin had it on his gladiator last year and it kept going on and off going from revere to pressing the breaks. He returned them and got a new set. It may be an updated version and he hasn’t had issues. So I installed them today and they look beautiful it’s nice and flush and super clean. I also have the bumper backup lights and didn’t realize I had also bought the PNP harness to connect them to this new tail lights. If anyone. Has the Oracle bumper backup lights get the plug n play harness makes the guess work go away !

I bought this lights to have a way bright tail light and it did a great job. Super bright and quick and easy installation.

One of my lights failed. I contacted customer service, sent the requested , receipt, video of the issue and pictures. They asked for an address to ship the replacement lights to and a pic of the cords cut once I replaced with the new lights. Thank you Oracle for standing by your product!

7inchRound LEDOffroadLights

• Improvements in brightness and reliability by adding a constant current LED driver to the main circuit board inside of the lamp to control the halos.• NEW! No need for Anti-Flicker Wiring Adapters- The new SMART Integrated Can-Bus system automatically adjusts- preventing flicker issues.• Increased Reliability- By conditioning the power going into the LEDs this prevents degradation which can shorten the overall lifespan of the product.• Wider Input Voltage Range- The new SMD Halos can operate on a very wide voltage range from 12V-24V so that voltage spike can not damage the LEDs.• Brighter LED Halos- by moving the heat load of the resistors off the PCB we are able to increase the number of LEDs on the circuit board without thermal issues.• LED chips upgraded from a Cree LED to a Phillips Luxeon ZES chip. They deliver a very high efficacy 130LM/W ratio while having lower thermal output.

View FMVSS 108 Test DataWiring for Halos:• Red Wire is (+) the positive wire• Black Wire is (-) the negative wireFor Halo Colors White and Amber (Road Legal Colors) we recommend:• Connecting wires to the Parking Light Harness• Connecting wires to Ignition PowerFor other Single Colors (Non Road Legal Colors) we recommend:• Connecting Wires to a Toggle Switch view here• Connecting Wires to a Controller view hereFor ColorSHIFT® Halos:• Connect wires directly to the ColorSHIFT® Controller you purchased

I bought this head lights for my jeep gladiator, Easy and quick installation they look great they are also super bright definitely recommend this product if you want to upgrade your oem head lights!!!

I've had my eye on these for a while! I have several Jeeper friends that have them installed and I love the look! I went ahead and ordered them, and was so excited when they arrived! I watched the video that they provide a QR code to, and I went to work replacing my stock JLUR lights. The video was clear and concise and very well done. It was easy to follow along and being a newbie at doing something like this, it was super helpful! The brightness of these LED lights is exactly like my title says, brilliant! They are bright and clear, and can we talk about the reverse lights for a minute! Oh my God, I can actually see when I'm backing up now! It's like a police car spotlight on the back of my Jeep now! This was one of the deciding factors in purchasing these lights, but the look of the flush mount was the primary factor! I'm absolutely thrilled and I love the way my girls rear end looks now! If you were ever doubting your purchase of these, stop it. Buy them right now! You will not be sorry!

Beginning stage of lighting up the engine bay and front grills. The center part looks pretty good. Will be lighting up the entire compartment with 2 more 36” strips

To fit these Lights to a JL  Wrangler or JT Gladiator you will need ORACLE Part# 5843-504 and ORACLE Part# 5844-504Product Features: (Per Light)- Low Beam Wattage: 30W Normal/36W Max- Low Beam Lumens: 2200 Lumens/3600 Raw Lumens- High Beam Wattage: 40W Normal/48W Max- High Beam Lumens: 3600 Lumens/4800 Raw Lumens- Color Temperature: 6000K (Cool White Color)- Input Voltage of Light: 12-24V DC- Input Voltage of Halo (If Included): 12V DC- Current Draw: 2.50 Amps @ 12V DC / 1.30 Amps @ 24V DC- Optional: ORACLE Halo Rings Pre-Installed- Premium Performance Phillips Luxeon ZES LEDs- Die-Cast Housing with Corrosion Resistant Coating- Heavy Duty Solid State Electronics- Hard-coated Polycarbonate Lens- Wide Beam Pattern with Sharp Cut-Off Line- Easy Plug & Play Installation- DOT and SAE Certified- 2 year warranty

These lights look really good. High brightness without leaping off the body like the factory stock tail lights. Fits snuggly without modification. But let me tell you about what happens when the inevitable happens. Customer service was quick to respond, replaced the damaged part with no question. The only delay was on me having the time to get them the info they needed. Oracle Lighting stands by their products!