These subminiature slide switches offer SMT, PCB, or PCB right angle termination options, SPDT circuits with 2 or 3 actuator positions, gold or silver contacts and epoxy sealed terminals.

These dual illuminated surface mount tactile switches measure 6.8mm x 4.5mm with a 2.5mm height, 160gf operating force, and many LED illumination color options.

These low profile, slide DIP switches are offered in surface mount (gull wing) design, 1, 2, 4, 8, or 10 positions, extended or recessed actuator, tape seal option, full pitch, gold contacts, and a high operating temperature up to 105°C

These sealed, long life, surface mount tactile switches measure 6.2mm x 6.2mm, are IP67 rated, and offer up to 5,000,000 life cycles, multiple actuator heights and operating forces, gull wing or J lead termination, and silver contacts.

These ultraminiature surface mount detector switches measure 3.5mm x 3mm, with a 2.53mm profile, are rated 1mA 5VDC, and come with a guiding post, a mounting boss option, overtravel, and silver contacts.

These long life, sealed, surface mount tactile switches measure 6.45mm x 6.45mm, are sealed to IP67, have a long life of up to 3 million cycles, offer a 3.5mm or 5.2mm actuator, 180gf, 260gf, or 350gf operating force, and silver contacts.

These subminiature slide switches offer panel or PCB mounting, up to six-pole circuits and six actuator positions, and numerous package and actuator designs including right angle.

Surface MountToggleSwitch

These miniature, surface mount tactile switches measure 3.5mm x 2.9mm, and offer a ground terminal option, four operating force options, and silver contacts.

These ultra low profile, surface mount tactile switches measure 4.5mm x 4.5mm with a 0.55mm height, three operating force options, and a long life up to 1,000,000 cycles, with silver contacts.

These miniature, surface mount tactile switches measure 3.5mm x 2.6mm, and offer a mounting boss option, a ground terminal option, four operating force options, up to 500,000 cycle life, and silver contacts.

These sealed, surface mount tactile switches measure 7.4mm x 7.4mm, are sealed to IP67, and offer multiple actuator heights, operating forces, and a long life of up to 1 million cycles, and silver or gold contacts.

These miniature, surface mount tactile switches measure 3.0mm x 2.5mm, and offer a mounting boss option, a ground terminal option, 160gf or 260gf operating force, and silver contacts.

These long life, surface mount tactile switches measure 12mm x 12mm, have up to 10 million cycle life, offer multiple actuator height options, operating force options, and silver contacts.

These illuminated, surface mount tactile switches measure 5.6mm x 3.4mm, with a 3.12mm height, 160gf operating force, and many LED color and bi-color options

These surface mount right angle tactile switches measure 7.8mm x 2.5mm, with a 3.5mm actuator, and offer 130gf or 260gf, with silver contacts.

This illuminated, surface mount slide switch offers many LED colors, a DPDT circuit, 2 position actuator, and a compact package design.

These SMT edge mount right angle tactile switches measure 4.50mm x 2.20mm with a 2.60mm height, and offer 160gf or 220gf operating force, 600,00 life cycles, and silver contacts.

These sealed, surface mount tactile switches measure 4.6mm x 2.8mm and are sealed to IP67, offering multiple actuator heights and operating forces, with silver contacts.

This 5-position navigation switch is surface mounted, and functions as 4-way directional, center select, rated at 20mA 15VDC, 100,000 cycle life, -20°C to 70°C operating temperature, measuring 12.4mm x 12.4mm, with 12.2mm actuator height, and gull wing termination.

This sealed, surface mount right angle tactile switch measures 7.1mm x 6.6mm and is sealed to IP67, features robust PCB soldering pads, and offers 160gf operating force, and silver contacts.

These low profile, slide, half pitch DIP switches are offered in surface mount (gull wing) design, 2, 4, 6, 8, or 10 positions, recessed actuator, tape seal option, half pitch, and gold contacts.

These ultra miniature micro surface mount tactile switches measure 3.0mm x 2.6mm with a 0.65mm height, offers 100gf or 160gf, and gull wing termination with silver contacts.

These ultraminiature surface mount tactile switches measure 3mm x 2mm, with a 0.60mm height, offering four operating force options, long life up to 500,000 cycles, gull wing termination, and silver contacts.

These surface mount tactile switches measure 4.5mm x 4.5mm, offer multiple actuator height and operating force options, and have an operating life of up to 500,000 cycles, with silver contacts.

These miniature slide switches offer both Panel or PCB mount, many termination options, vertical or horizontal actuation, single or double pole, with 2 or 3 positions, gold or silver contacts, with epoxy sealed terminals.

These rotary DIP switches offer IP67, multiple PCB termination options including SMT, through hole, and right angle, multiple actuator options, 4, 6, 8, 10, or 16 positions, gold contacts, and tube or tape and reel packaging.

These surface mount right angle tactile switches measure 6.5mm x 6.5mm, offer four actuator height options, a solder pad option, an auto placement tab option, and silver or gold contacts.

These ultraminiature, long life, illuminated, surface mount tactile switches measure 4.9mm x 4.9mm with a low height of 2mm, 1 million cycle life,160gf or 250gf operating force, and many LED color options.

This surface mount right angle slide switch offers a SP3T circuit, with a 1.5mm travel to any position, a compact 2.6mm x 9.7mm package design, with a 1.4mm profile height off the pcb.

This surface mount right angle slide switch offers a SP3T circuit, and uniquely performs a latching function in the left and center position, and a momentary function in the right position.

Subminiature, sealed toggle switches, IP67, surface mount right angle mounting design, Single pole, latching or momentary, silver or gold contacts, epoxy sealed, tape and reel packaged

These sealed, surface mount tactile switches measure 6mm x 3.5mm and are sealed to IP67, offering two actuator height options and two actuation force options, with silver contacts.

These illuminated, surface mount tactile switches measure 6.1mm x 6.1mm with a 7.8mm height, and offer 100gf, 160gf, or 260gf operating forces, with many LED colors and additional cap options

These pcb mounted rotary DIP switches offer multiple termination options, actuator options, 10 or 16 positions, 2x3, 3x3, or 4x1 terminal layout, and tube, tape & reel, or bulk packaging.

These long life surface mount tactile switches measure 6mm x 6mm, have a long life of 1 million cycles, and offer numerous actuator height options.

These low profile, surface mount tactile switches measure 5.2mm x 5.2mm with a 1.5mm height, and offer five operating forces options, gull wing termination and silver contacts.

These illuminated, surface mount right angle tactile switches measure 6.4mm x 3.55mm and offer many LED options including dual-LED. The actuator is 3.9mm, with 160gf operating force, and silver or gold contacts.

These 5-position navigation switches are surface mounted, and function as 4-way directional, center select, rated at 50mA 12VDC, 100,000 cycle life, -40°C to 85°C operating temperature, measuring 7.4mm x 7.7mm, with four actuator heights to choose from, and gull wing or J lead termination.

This sealed, surface mount right angle tactile switch measures 3.85mm x 1.95mm, with a 2.9mm height, and is sealed to IP67, with a 160gf operating force and silver contacts.

Subminiature switch is a surface mountable (SMT), momentary contact push button with a DPDT contact arrangement and gull wing terminals that are wave solderable. The switch has a long electrical life of 10,000 cycles.

These low profile, piano DIP switches are offered in through hole right angle (splayed) or surface mount right angle (gull wing) design, 2,4, 6, 8, or 10 positions, extended actuator, full pitch, and gold contacts.

These reverse surface mount tactile switches measure 6mm x 6mm, and offer four operating force options, with silver contacts.

These surface mount switches measure 4.2mm x 3.2mm with a 2.5mm actuator, and offer 180gf, 250gf, or 400gf, in gull wing termination with silver contacts.

This sealed, surface mount tactile switch measures 8.4mm x 8.4mm and is sealed to IP67, with a 500,000 cycle life, a 3.95mm actuator, 400gf operating force, gull wing termination, and silver contacts.

These miniature, surface mount tactile switches measure 3.9mm x 2.9mm, and offer a mounting boss option, 160gf or 250gf operating force, and silver contacts.

These sealed surface mount tactile switches measure 6.3mm x 6.3mm and are sealed to IP67, with several actuator height and operating force options, gull wing termination and silver contacts.

These sealed, long life tactile switches measure 10.1mm x 10.1mm, are sealed to IP67, and offer a long life of 10,000,000 cycles. Both SMT (gull wing) and through-hole termination options are available, with many actuator length options, and silver contacts.

These sealed, ultra slim rotary DIP switches are sealed to IP67, offer multiple PCB termination options including SMT, through hole, and right angle, multiple shaft actuator options, 10 or 16 positions, and tube or tape and reel packaging.

Surface mount snap action switch with a subminiature package size and designed for higher reliability applications with a life expectancy of 3 million cycles.

These subminiature, surface mount tactile switches measures 4.8mm x 4.8mm, offer multiple operating force options, with gull wing termination and silver contacts.

These low profile, slide, tri-state DIP switches are offered in through hole (straight pin) or surface mount (gull wing) design, 4, 5, 8, 9, or 10 positions, extended or recessed actuator, tape seal option, full pitch, and gold contacts

These miniature surface mount right angle tactile switches measure 4.7mm x 3.5mm, with 4.5mm actuator, 1.65mm height off the pcb, a mounting boss option, 160gf or 220gf operating force, and silver contacts.

These low profile, slide DIP switches are offered in through hole (splayed or straight pin), or surface mount (gull wing) design, 1 to 12 positions, extended or recessed actuator, tape seal option, full pitch, and gold contacts.

This surface mount right angle slide switch offers a SPDT circuit, with a 1.5mm travel, and a compact 2.6mm x 6.7mm package design with a 1.4mm profile height off the pcb.

These surface mount tactile switches measure 6.2mm x 6.2mm, and offer multiple actuator height options, operating force options, termination options, and silver contacts.

Surfacemounted dimmerSwitch

This SMT edge mount right angle tactile switch measures 2.0mm x 2.8mm, with a 0.65mm height, 160gf operating force, and has silver contacts.

These illuminated, surface mount tactile switches measure 7mm x 6.8mm with a 12mm height, and offer many LED colors and additional cap options, in a 160gf operating force

This miniature surface mount right angle tactile switch measures 6mm x 5.4mm has a 180gf operating force, comes with mounting bosses, gull wing termination, and has silver contacts.

These SMT edge mount right angle tactile switches measure 6.2mm x 2.5mm and offer multiple operating forces, termination options, and silver contacts.

These surface mount tactile switches measure 6mm x 6mm, and offer multiple operating force and actuator height options, a ground terminal option, a long life option, and silver contacts.

surface mounton/offswitch

These miniature, low profile, surface mount tactile switch measure 3.7mm x 3.7mm with an ultra-low profile of 0.35mm, 160gf or 235gf operating force, and silver contacts.

These soft touch, long travel, surface mount tactile switches measure 6mm x 6mm and offer a long travel of 1.3mm, in both 180gf or 260gf options, and a 5mm actuator, with silver contacts.

These subminiature, surface mount right angle tactile switches measure 4.25mm x 3.3mm, offer multiple actuator heights and 130gf or 160gf operating force, and silver contacts.

Surfacemounted LightSwitchBox

This 5-position navigation switch is surface mounted, and functions as a 4-way directional, center select, rated at 50mA 12VDC, 200,000 cycle life, -40°C to 85°C operating temperature, measuring 9.8mm x 9.8mm, with a low profile of 1.55mm.

These surface mount tactile switches measure 6mm x 6mm, offer numerous actuator height options, multiple operating force options, cap options for certain models, and silver or gold contacts.

This ultraminiature surface mount detector switch measures 4.8mm x 5mm, with a 3.8mm profile, and is rated 1mA 5VDC, with overtravel, and silver contacts.

These SMT edge mount right angle switches measure 4.8mm x 2.2mm and offer 160gf or 250gf operating forces, gull wing termination, and silver contacts.

These subminiature, surface mount right angle detector switches are rated 100mA 50VDC, with a SPST or SPST-NO circuit, a mounting tabs option, 2.0mm travel, and silver contacts

These surface mount tactile switches measure 3.5mm x 6mm, and offer multiple force and actuator height options, gull wing or J lead termination and silver contacts.

SMT surface mount subminiature pushbutton switches featuring SPST or SPDT functions, tape and reel packaging, and 3A ratings.

These subminiature surface mount right angle tactile switches measure 4.7mm x 2.9mm, with a 3.55mm actuator, 1.35mm height off the pcb, a mounting boss option, a ground terminal option, 160gf or 220gf operating force, and silver contacts.

These sealed, illuminated, surface mount tactile switches measure 6.2mm x 4.6mm and are sealed to IP67, with numerous LED color options, a 3.72mm actuator, 200gf operating force, and silver contacts.

These sealed, long life, surface mount tactile switches measure 6.3mm x 6.2mm and are sealed to IP67, with up to 1,000,000 cycle life, 160gf or 260gf, a 3.1mm actuator, and silver contacts.

Surface Mount Switch

These soft touch, long travel, surface mount tactile switches measure 6mm x 6mm and offer a long travel of 1.3mm, in both 200gf or 350gf options, and a 5mm actuator, with silver contacts.

These sealed, long life, surface mount tactile switches measure 6.9mm x 6.2mm and are sealed to IP67, with up to 500,000 cycle life, offering either a flush or 3.4mm actuator, 160gf or 260gf, gull wing or J lead termination, and silver contacts.

This subminiature, sealed rocker switch is IP67 rated and comes with many actuator and termination options with silver contacts power rated for up to 3 amps.