Want to drop us a line?  You can get in touch by filling out the form below and we’ll get back to you as soon as possible!

EVA Floor Bunding (970mmL x 140mmW x 22mmH), EVA Floor Bunding Corner Piece (300mm x 300mmL x 140mmW x 22mmH), EVA Floor Bunding (970mmL x 140mmW x 40mmH), EVA Floor Bunding Corner Piece (300mm x 300mmL x 140mmW x 40mmH)

No. Regardless of if you buy a 20”, 30”, 40” or 50” bar, they will not come preassembled. But don't worry! The inside of the box itself contains a full, true-to-scale assembly guide to ensure you get it done quickly. Even better - we included all of the tools necessary for installation. Grab a beer and get to work, it shouldn't take too long at all!

The KC FLEX ERA® LED Light Bar is designed to push the boundaries of what a light bar can be. Built as the successor to our original FLEX Array light bars, this bar defies new limits of engineering while building on the strengths of our previous platform. With high-output performance and a flexible design, the FE Bar is like nothing you've seen before.

For those that desire the furthest possible distance out of their light output, the Spot Beam lenses will perform best. For those that want short to mid-range distance coverage while also having more horizontal coverage, the pre-assembled Spread Beam lenses will be best.

Here's a quick guide to selecting the right beam pattern for your adventures. Check out our Buyer's Guide to Off-Road Lighting for more info.

With 7,912 lumens of power per 10" segment, the FLEX ERA LED Bar sets a new standard in output, offering unprecedented visibility and beam quality—ideal for demanding, high-speed conditions.

Combo Beam - Combines different optics to create a balance of distance and width, such as with light-bars.

Fog Beam - Wide beam with a sharp vertical cut-off, making it street legal for foggy, rainy, snowy, or dusty conditions.

It's crucial to verify that the off-road lights you're considering will fit and work with your vehicle. Whether you're using universal mounts or vehicle-specific kits, we've got you covered.

The ends of each 10” segment are universal in that they can accept either and End Mount Bracket or a Linker Bracket. Just make sure that you put the Overmolded Power Linker on prior to the main bracket! Use the included hardware and go snug without overdoing it.

Spot Beam - Tighter, more focused light that prioritizes distance - for higher speeds or remote areas.

Yes, light locks are compatible with the FLEX ERA® LED Light Bars. Use SKU 7222 aka the M8-1.25 Light Lock Security Nut Set for the main end mount, and SKU 7223 aka the M10-1.5 Light Lock Security Nut Set for the bottoms of the L-Brackets. But remember, don't lose the included key! Otherwise you'll have a fun evening with an angle grinder if you ever need to remove the lights.

Our standard KC Adventure Further Guarantee applies to these lights. We encourage you to swap out your lenses to see what works best for you - just do so in a clean and controlled environment. Feel free to check out our installation videos for best practices or give us a call and we'll be happy to assist!

Our lights are designed to be universal and can work with mounts from other companies, including roof racks, aftermarket bumpers, and more. Ensure you have the proper specs for easy installation.

At each junction point of two 10” FE Bar segments, the linker bracket has two options for where to place the set screw that determines if the bar is curved or straight. Place the smaller countersunk bolts into the holes shown below on each junction to make it to your liking.

Any FE Bar from 10" to 50" comes standard as a Master Kit with absolutely everything you need to get up and running quickly so you can spend less time in the garage and more time out on the trails.

Flood Beam - Typically used as work, scene, camp or back-up lights to see a broader area with a shorter distance.

Here's a quick guide to selecting the right beam pattern for your adventures. Check out our Buyer's Guide to Off-Road Lighting for more info. Flood Flood Beam - Typically used as work, scene, camp or back-up lights to see a broader area with a shorter distance. Fog Fog Beam - Wide beam with a sharp vertical cut-off, making it street legal for foggy, rainy, snowy, or dusty conditions. Wide‑40 Wide-40 Beam - Hybrid between fog and driving beam, perfect for off-road cornering. Driving Driving Beam - Street legal SAE/ECE lights that supplement primary headlights to provide better visibility. Spread Spread Beam - Provides a bright, wide beam that prioritizes peripheral visibility & clarity for off-road driving. Combo Combo Beam - Combines different optics to create a balance of distance and width, such as with light-bars. Spot Spot Beam - Tighter, more focused light that prioritizes distance - for higher speeds or remote areas.

KC's power management solutions all work together to provide off-grid, sustainable energy, so you can extend your adventure further and stay powered anywhere.

Yes. The FLEX ERA® Bar still has the main power circuit for the full brightness mode, and also uses a second power circuit to offer the Amber Backlight.

To determine the appropriate size for your vehicle or mounts, measure the intended mounting location's width and compare it to the light bar's dimensions. Ensure there is extra space outside of the mounts hardware, typically an additional 0.5-1 inch on each side.

To select the perfect FE Bar for your vehicle, it's essential to consider a few things for optimal performance and fit. Here's a quick guide to help you decide what is best for your needs.

Not exactly. While it might look similar in size to the FE1, it's an entirely new product. The bezels and shields are not interchangeable. In fact, the FE Bars have very similar performance to a single FE4 light due to the use of similar optic components, just in a different configuration. This product is a complete reimagination of the previous FLEX Array Bar, that stays true to the FLEX ERA Family of products.

If you're unsure about fitment or if our mounts will work for your vehicle, contact our KC experts by email or phone.

The FLEX ERA LED Light Bar helps you stand out in the crowd thanks to its Amber LED backlight. This can be used on-road or off-road, day or night, adding an extra touch of style.

EVA Floor Bunding is a quick and easy way to create a liquid-tight bunded area in most workplaces. Suitable to be used in traffic areas, the bunding will compress to allow easy egress and immediate use. It performs exceptionally well in hot and wet weather conditions, making it a versatile choice. To make installation even more convenient, this product comes pre-glued. Additionally, if any sections become damaged, they can be easily replaced without hassle.

Each box of FLEX ERA® LED Light Bars lights come standard as a Master Kit, which includes all beam pattern lenses that are available. The lights come preassembled with the Combo Beam lenses (vertical lines ends of the lens). There are also Spot Beam Lenses (complete clear appearance) included in the kit.

Looking for installation advice? KC Academy offers comprehensive information on wiring, mounting, and installation options.

Our time-tested FLEX family tradition ensures you can personalize your rig with KC's colored accent bezels. These bezels come standard in gold, but you can choose from deep red, rich blue, or gloss black to suit your style.

Absolutely! Customization and personalization is as core to the FLEX ERA Family as performance is. We also offer the bezels in 10” segments of red, blue, and black bezels.

Guessing the best beam pattern is over. The FLEX ERA LED Light Bar Master Kit includes lights, both beam pattern lenses, spare o-rings, KC logo covers, and a complete wiring kit, so you spend less time in the garage and more time on the trails.

Since the lens is designed to be swappable, how does this impact the warranty should anything happen? E.g. if water ingress occurs due to user error while swapping the lens?

What is the difference between the FLEX ERA® LED Light Bars and the discontinued FLEX Array Light Bars?

For select vehicles, such as Jeeps, Fords, and UTVs, we offer specific brackets and mounts for easier installation. These kits ensure a perfect fit and a hassle-free setup.

The FLEX ERA LED Light Bar is linkable, curvable, and optic swappable, defying all engineering limits while staying true to the core elements of the FLEX ERA family. Whatever your lighting demands, this bar delivers.

I bought this light bar for my 15' Jeep jk after purchasing the 50” flex era LED bar. This 10” light bar puts out just the right amount of light (easily overwhelming) my high beam KC LED headlights. The wiring harness is the best I've seen with fully heat shrinked fittings and heavy gauge wire. Light bar comes with very robust hardware. It seems very well made and allows for attaching the wiring harness to the left or right side of the light bar which is convienant for vehicles that have their batteries mounted on the left or right side. I would definitely purchase this light bar again; to include the Flex Era 50” LED light bar which is absolutely insanely bright!!!!

While both enhance visibility in poor visibility conditions, Amber Shields will excel in extreme conditions like highly dense dust or silt, with their darker hue minimizing glare. On the other hand, our Performance Yellow Lenses offer a purer, brighter yellow output, making them great for a broader range of conditions from dust to wide-open and clear environments. In addition, the Amber shields simply snap over the face of the light, while the Perf Yellow Lenses will entirely replace the clear spot or combo beam pattern lens. Combo Clear and Spot Clear lenses come with the Master kit. All Performance Yellow lenses are sold separately.

Driving Beam - Street legal SAE/ECE lights that supplement primary headlights to provide better visibility.

Spread Beam - Provides a bright, wide beam that prioritizes peripheral visibility & clarity for off-road driving.