Prior to drilling or screwing, double check the screw length to make sure they will not interfere with any parts of the vehicle on the backside.

Happy Lightingapp how to connect

Determine the location for the controller box and run each wire back to this module after the lights have been installed. Confirm the wiring harness will reach the vehicle's battery or power source from the controller location. Also, the switch will reach the desired mounting location or rely.

Happy lightingapk

Step 2 - Make sure your bluetooth is turned on and open your bluetooth settings on your device and find the bluetooth device

Happy Lightingmusic

North Lights are designed to increase your visibility and safety while off-road. So go ahead and take that trail and see where it leads you!

The red wire should be connected to the positive terminal on the battery. The black wire connects to the negative battery terminal.

First, select the location you wish to install the rock lights on your vehicle. Determine what rock light wire length is needed for each location back to the wiring harness prior to installing. If needed additional extension wires may be purchased.

Our lights are built tougher so can adventure further with confidence. All of our lights are covered by our limited lifetime warranty.

Happy LightingBluetooth

Once the image is uploaded select a spot on the image and the color will display. The rock lights will automatically switch to the color selected from the image.

Control the 6-piece or 8-piece RGB Rock Light Kit with the touch of a button via Bluetooth app on your phone or ipad. Choose from millions of color options or match it to your vehicle by selecting from a photo. Plus, allow the lights to dance to the music or scroll through various preset options.

Happy Lightingheadlights

We make it easy to install up to 8 RGB rock lights by using one bluetooth control box. This allows all wires to run to one location.

To turn on the RGB rock lights use the power icon at the top of the app. It will turn green when on and connected to the bluetooth controller.

Happy Lightingapp LEDlights

Once you have all lights secured and connected, switch installed, and wiring harness connected to the power source, you're ready to turn on your RGB rock lights.

We want to make sure you are completely happy with the lights that you purchased so we offer 30 day hassle free returns policy.

Happy lightingLEDlightsnot working

Once the locations and rock light wire lengths have been determined, run the wire through the rubber mounting pad. Afterwards install the screw style you wish to use for mounting through the small black screw holder followed by the light and rubber pad. If needed pre-drill a smaller hole in the mounting surface to allow for the screw. Secure the light and rubber pad with the screw to the mounting surface.

Happy Lightingmanual

Blue colored safety lights are most associate with law enforcement. However, they can be used in other situations as well. Many states allow snow plow operators to use blue lights in conjunction with another color like amber to indicate the plow is operating on the road. Indoor and exterior building uses include utilizing blue safety beacons to locate phones/intercoms or other safety equipment. They can also be used as a visual status alert to certain conditions that exist around a building. Choose from a large variety of blue beacon lights for your application.

On the back of the mounting surface add the washer and nut. Tighten to confirm the light is secure once both screws are installed. Repeat for each side and rock light.

Connect each rock light to a plug and play connector. Tighten to make sure that the wire and waterproof connector are properly secure.

Run the power switch to the desired location. The switch may be removed and wiring harness spliced if connecting to a rely or switch panel. Consult your relay or controller for proper installation instructions.