Commonly Used Traffic Cones: An Overview - a traffic cone
dot/bar displaydriveric
After installing all bios and Vbios updates then enabling IL2 Rebar using NVidia Profile Inspector, I lost a substantial and pretty consistent 10 fps when using VR and HP G2 at 100% SS. Went from 85 fps average down to 75 fps.
Given that I doubt there'd be any way to replace my RTX 3090 FE, I'm really wondering if I should go to flash it. I'll just wait a week for the dust to settle to see what is going on, and how reliable that is, before I potentially bolt this card.
I know you dabble in DCS as well, wondering if your experience with 3090 is better. My 2080ti/5900x combo slice can't handle it even at 45fps reprojection mode as it's a total ghosting mess, and that's with using the shaders mod and low taxing config settings.
Yes, exactly. January the 5th is the date I managed to get the 6800 XT, and I am not aware of anybody, who could test the card in this game sooner than me. So I am not sure, If anybody have actually tried to run the game on rx 6000 series card with resisable BAR off.
picked up the DCS and A8 couple of days back, started to fly it. Man, their VR performance is so bad it's discouraging. Made me appreciate the awesome work the IL2 devs do here even more!
It's a driver-level feature, I believe. NVidia are using their software to automatically enable the feature in games that they have tested, kind of like their VRSS I think. They're never going to test IL2 so you will need to enable resizeable BAR via NVidia inspector, for il2.exe
Well that would come from your vid card mfg. Mine was EVGA so that is where I got my update today through their Precision X1 software.
JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
No. BAR was supported only in MOBO,s with updated BIOS. My MSI X570 Tomahawk received the first BIOS compatible (BETA) on January 4th. AGESA version on february. MOBOs with older chipsets, received the BIOS update few weeks ago.
I know you dabble in DCS as well, wondering if your experience with 3090 is better. My 2080ti/5900x combo slice can't handle it even at 45fps reprojection mode as it's a total ghosting mess, and that's with using the shaders mod and low taxing config settings.
I wonder if resisable bar could be one of the reasons for bad performance of RX 6000 series radeon cards in IL-2. I have one 6800xt in one of my system and have benched it with poor results. I haven't tried resisable bar off though...
Probably only way for it to really work would be for Nvidia to enable it through a profile for IL-2. Which likely won't happen.
Simply setting the IL2 Profile back to normal (no Rebar for IL2) with the NVidia Profile Inspector and restarting WMR I got my 10 fps extra back.
Huh. I found the page on nVidia's site. I've been building/upgrading PCs for more than 20 years and I don't think updating video card firmware is something that I've ever done.
dot/bar displaydriver
MARKET LEADING PERFORMANCE.ST3K-40L features 40 of OSRAM’s® finest OSLON® LED, selected for unrivalled efficiency.8 Flood + 24 Spot + 8 Flood reflector distribution forms a remarkable beam that pushes the wide beam out at 50° and spot beam at 5.8° all the way to staggering 1 lux @ 699mTrue White 5700K Colour temperature offers stunning clarity and definition.Our Pure-Drive™ circuit design allows 97% of input power to go directly to LEDs.BUILT TO WITHSTAND THE RELENTLESS PUNISHMENT OF THE DEEP AUSTRALIAN OUTBACK.Finished in 100% Polyester UV and abrasion resistant powder coat ensures that our bars will never discolour.Pressure Equalization vent | Protects against water ingress, dust & contaminants.IP68 | Dust & Particle tight + Water-proof up to 3 meters!Environmentally sealed Deutsch DT-2 connector.Protected against EMC and RFI.Includes our Easy-Fit High Beam Plug and Play Wiring Harness which includes H4 and HB3 Adapters making for an easy connection to high beam. Unlike the copycat harnesses on the market, ours has built-in electronics making our harness compatible with even the most modern and sophisticated wiring systemsBacked by a 5 Year Replacement Warranty.Click here to find your vehicle-compatible Piggyback Adapter.Please Note: Upon unboxing the ST3K, you will hear a distinct rattle. The sound that you are hearing is from the captive nuts in the end caps for the side brackets. This is perfectly normal and will go away once the side brackets are installed and tightened.
8 Flood + 24 Spot + 8 Flood reflector distribution forms a remarkable beam that pushes the wide beam out at 50° and spot beam at 5.8° all the way to staggering 1 lux @ 699m
Yes, that seems to be unlikely. This is probably not a right forum topic for that, but I was just wondering if turning off the resizable bar could help radeon card owners to improve their underwhelming performance in this game.
BarDiver Cocktails
Given that I doubt there'd be any way to replace my RTX 3090 FE, I'm really wondering if I should go to flash it. I'll just wait a week for the dust to settle to see what is going on, and how reliable that is, before I potentially bolt this card.
The ST3K range is easily comparable to the STEDI Type-X and ST4k range. With a strong penetrating beam of 493m at 1 LUX and 55m out to the shoulders of the road (with flood beam), the ST3K 41.5 is the perfect all-rounder!
But note I'm not using his standard settings, more a set for practical MP play. You'll see in the attached graphs that, depressingly, those settings leave the GPU underused.
My system now shows this Resizable Bar thing as being enabled. I had a bios update for my motherboard for this a little earlier.
Yeah, I've been toying with the idea of upgrading the vBios for my EVGA 3080, but I don't think I would see any benefit in my flightsims right now. From what I've read online it appears that Resizable BAR needs to be enabled via Nvidia drivers for each game and not necessarily by the game devs so it might be a while before it available in IL2, DCS, etc. Or maybe the devs need to coordinate with Nvidia to make it happen? My card and system is running topnotch as is in IL2 GB with Ultra settings at 144 fps on a 1440p monitor right now, though I did undervolt the card for lower temps and lower power consumption, so I'm kind of on the fence about it as I don't play any of the games mentioned in the press releases or upgrade release notes. Maybe I'll get around to it next week.........
The ST3K 41.5 Inch LED Light Bar utilizes the Pure Drive technology (of Type-X and ST4K fame), to deliver a powerful punch.
Click here to find your vehicle-compatible Piggyback Adapter.Please Note: Upon unboxing the ST3K, you will hear a distinct rattle. The sound that you are hearing is from the captive nuts in the end caps for the side brackets. This is perfectly normal and will go away once the side brackets are installed and tightened.
Single Player Campaign flying in the Hornet and Persian Gulf is very nice and smooth for me. Even on a crowded Super Carrier.
I have a FE card, and it was pretty painless. The utility checks for compatibility and version before proceeding. And it only took a couple of seconds during the part that said a power loss would damage the card.
Results are in............................................ Resizable Bar for a 5800x CPU and a MSI RTX 3090 has a negative impact on fps, for my test sample of one. i.e. it sux's
Repeated question from another poster "did you enable REBAR for IL-2 with the Nvidia Inspector?" Needs to be enabled specifically for IL2 before you will any impact.
I've had a negative experience with RE Bar. Updated my x570 Gigabyte M/B to a new BIOS with Re Bar support. and enabled it . I now cannot see the BIOS when my 3080 is in my case. If I slot in my old 1080ti I can happily see the Gigabyte splash screen and enter BIOS. Since enabling RE Bar on the board, if my 3080 is in all I get is a black screen until Windows loads. No splash screen displays. BIOS will load I just can't see it. I tested by hitting Del key on reboot, No windows screen came up, I then hit F10 and enter. PC rebooted as I would expect if I was in the bios screens. I have tried HDMI and Display port. Same issue on both. I also disabled REBar in the bios with my 1080 installed. Has had no affect with the 3080. just cannot see thesplash and bios screens with the 3080 installed
picked up the DCS and A8 couple of days back, started to fly it. Man, their VR performance is so bad it's discouraging. Made me appreciate the awesome work the IL2 devs do here even more!
Bar driverdownload
Will do next week, when I get to my office computer. Right now I am on my rtx 3090 system. Btw, turning on reBAR caused some stability issues on my previously stable system (5900x, PBO on, 15 negative curve on all cores), does anybody have same experience?
El Malo
Used to flash my old Radeon cards back in the day to unlock the clocks, that was about 15 odd years ago, not needed to since then.
Yeah not sure any of my flight sims will end up with support for this, maybe some other VR games I play from time to time, will have to see.
I am working away from my home at present and will post some SYN_Vander recorded mission comparison's once I have access to my flight sim kit again.
Yeah I will admit I was kind of holding my breath when I flashed this EVGA 3090 FTW3 Ultra, flashing any firmware always includes a pucker factor so to speak.
© 2012-2023 1C Game Studios | 1С-777 Limited, 32 Kritis Street, Papachristoforou Building, 4th Floor, 3087 Limassol, Cyprus. All rights reserved Powered by Invision Community
In practice, the performance benefits of Resizable BAR can vary substantially from game to game. In our testing, we’ve found some titles benefit from a few percent, up to 12%. However, there are also titles that see a decrease in performance, so NVIDIA will be pre-testing titles and using game profiles to enable Resizable BAR only when it has a positive performance impact.
CharBar
Huh. I found the page on nVidia's site. I've been building/upgrading PCs for more than 20 years and I don't think updating video card firmware is something that I've ever done.
No. BAR was supported only in MOBO,s with updated BIOS. My MSI X570 Tomahawk received the first BIOS compatible (BETA) on January 4th. AGESA version on february. MOBOs with older chipsets, received the BIOS update few weeks ago.
Bardiver yelp
Simply setting the IL2 Profile back to normal (no Rebar for IL2) with the NVidia Profile Inspector and restarting WMR I got my 10 fps extra back.
Our STEDI ST3K LED Light is was designed to bring a large amount of light to a small amount of space. With a total height of just 2.4" (with the side brackets attached), you will find the ST3K is able to be mounted on your front bar or grill, whilst maintaining the factory look of your vehicle.
I wonder if resisable bar could be one of the reasons for bad performance of RX 6000 series radeon cards in IL-2. I have one 6800xt in one of my system and have benched it with poor results. I haven't tried resisable bar off though...
Includes our Easy-Fit High Beam Plug and Play Wiring Harness which includes H4 and HB3 Adapters making for an easy connection to high beam. Unlike the copycat harnesses on the market, ours has built-in electronics making our harness compatible with even the most modern and sophisticated wiring systems
Yeah not sure any of my flight sims will end up with support for this, maybe some other VR games I play from time to time, will have to see.

Have raised it with Gigabyte support who have suggested lots of things to try, all of which I have already done. Next step is to flash the card to see if that resolves the issue. But given the responses above, I'm not keen. Add the fact I have a i9 11900 and Z590 MB sitting beside me to replace the 5600x and x570 currently giving me grief. Do I really want to flash a £1000 graphics card to see the bios on a m/b I'm about to swap out
Probably only way for it to really work would be for Nvidia to enable it through a profile for IL-2. Which likely won't happen.
Are you sure about that? I think I was one of the first to bench 6800XT in this game, and I ran the benchmark with resizable BAR enabled. I think it was supported since day one, or shortly after. To be clear, I myself don't think it's bad performance is caused just by reBAR, but who knows....
Yeah not sure any of my flight sims will end up with support for this, maybe some other VR games I play from time to time, will have to see.
After installing all bios and Vbios updates then enabling IL2 Rebar using NVidia Profile Inspector, I lost a substantial and pretty consistent 10 fps when using VR and HP G2 at 100% SS. Went from 85 fps average down to 75 fps.
Given that I doubt there'd be any way to replace my RTX 3090 FE, I'm really wondering if I should go to flash it. I'll just wait a week for the dust to settle to see what is going on, and how reliable that is, before I potentially bolt this card.
Bar driverwindows 10

After installing all bios and Vbios updates then enabling IL2 Rebar using NVidia Profile Inspector, I lost a substantial and pretty consistent 10 fps when using VR and HP G2 at 100% SS. Went from 85 fps average down to 75 fps.

Results are in............................................ Resizable Bar for a 5800x CPU and a MSI RTX 3090 has a negative impact on fps, for my test sample of one. i.e. it sux's
13322766566