high baylight中文

1. How many foot-candles do you want on the ground? 2. What is the physical space of the area? 3. Are there any obstructions?

UFO High Bay light100W

Maybe you're starting to replace Metal Halide / High-Pressure Sodium / HID fixtures with LED high bay lights. When selecting new indoor LED High Bay Fixtures from a reputable LED high bay light manufacturer, here are the equivalent LED lumens for each common HID wattage fixture.

Some are, but not all. Our LED UFO fixtures on this page are IP-rated with a rating of IP65 or higher. Our linear fixtures are not IP-rated and should not be used in wet locations where waterproof lighting is needed.

Some high bays we offer allow you to select the color temperature, and power (wattage) by changing onboard toggle switches.

High bay LED lights are powerful, indoor, ceiling-mounted LED Lights used to illuminate areas, like storage areas and aircraft hangars, with high ceilings. Ceiling heights ideal for our LED high bays are typically in the range of 20 feet to 60 feet. Below 20 feet, you should consider a low bay fixture (which is essentially a low-powered high bay light).

There are two main types: UFO and linear. UFOs are round, small fixtures that are a good replacement for metal halide high bays. Linears are larger, rectangular fixtures that are a good replacement for fluorescent high bays.

With so many options and fixtures available, it's hard to decide what option is going to meet your needs and requirements. The sales engineers of LED Lighting Supply are experts in High Bay Lighting. Use our experience and tell us your needs, and we will provide you with the best LED High Bay lighting options for your project or application. We can provide you with a free lighting plan to make sure the area is well-lit and the lighting is balanced.

UFO LED High Bay Light150W

Transform any large indoor space into a bright, productive environment with high bay LED lights. We offer commercial and industrial high bays that will provide years of energy efficient, maintenance-free lighting while significantly lowering your lighting bill over metal halide and fluorescent lighting. We offer free lighting plans to ensure the light we recommend and you select provides the best foot candles and light balance across the entire space, whether you are in a warehouse, factory, aircraft hangar, workshop, or gymnasium. We have UFO and linear panel high bay lighting solutions with power options ranging from 60 to 600 watts, voltage options ranging from 100V to 480V, 3000K to 5000K color temperatures, and many options like motion sensors. We also have wattage adjustable, color adjustable, and even beam angle adjustable high bays. LED Lighting Supply is your trusted high bay supplier with 15+ years of industrial and commercial experience.

There are many differences. The main difference is high bay lights are designed for ceiling-mounted indoor applications and flood lights are designed for pole-mounted outdoor applications.

While LEDs are far more efficient than other types of lighting, they do produce some heat. Most of the energy consumed by LED lights is converted into light. Most of the LED high bay lights we sell will get 'warm to the touch', while others will get a little hotter. However, none will get as hot as a metal halide light that could burn you if touched.

We recommend to select an option from the below confirmation box and not to click on close button to view nearest Blackwoods Branch stock.

The fixtures look very similar but there is one key difference: low bay lights are low-power versions of high bay lights. Secondly, you should only install low bay lights with ceiling heights below 20 feet and high bay lights above 20 feet ceiling heights.

Our High Bays are designed to last a long time. The wattages offered range from 100 Watts to 600 Watts. They have larger heat sinks, reliable drivers, and more LED Chips driven below max capacity. But this also means they cost a bit more because there is just more material used in making the high bay. Our commercial and industrial customers want reliability, dependability, and quality. That's why we stay away from offering the ultra-cheap high bays. And if one of our high bays has an issue, we're here to help.

LED UFOlights

We have many high bay light options, ranging in power from 60 Watts to 600 Watts, covering a voltage range of 100V to 480V. We have both types of high bay lights: UFO LED high bay lights (round) and linear high bay lights (rectangular) fixtures.

The high bays on this page will easily last for 50,000 hours or more. If you use high bays 12 hours a day, 365 days a year, that equals 4380 hours of use per year. Over 50,000 hours, that's 11.5 years of expected life.

LED High Bays are ceiling-mounted LED Fixtures designed to light up large interior spaces, like warehouses, gyms, and aircraft hangars. Ideally, they are mounted 20 feet or higher.

Converting your lights from metal-halide or fluorescent? There is a high probability we can do a 1-for-1 replacement to an LED High Bay light. For new lighting layouts, it’s important to go through the following steps:

UFO LEDlights 200W

The most common type of control is motion sensors. They will turn the LED High Bay to full power when motion is detected, and dim the High Bay when the area is void of motion.

It depends on power, lumens, beam angle, and mounting height. The best way to determine the light coverage of a high bay light is to create a lighting plan. The lighting plan will determine the perfect fixture to get the coverage you need.

These lights have onboard toggle switches that allow you to select the light output and the color temperature. This takes the guesswork and risk out of selecting the right power and color temperature.

Here are some general guidelines that will help you do some quick calculations.  Please note, that the higher the ceiling, the more powerful light you will need. For ceilings ranging from 15 to 40+ feet, use the following guide to choose the proper lumen output. For lower ceilings, 8-15 feet, use low bay lights.

Linear LED High Bays to match the style of fluorescent high bays. They are rectangular. These lights can easily replace any fluorescent high bay one-for-one and provide better lighting without the need to replace any bulbs or ballasts. LED lights have the added benefit of not flickering and not humming.

Most of our LED High Bays are equipped with a whip/cord. Our customers usually hard wire out lights into a junction box, or install a plug that allows them to use an existing socket. A qualified electrician will easily be able to install our high bays using either approach.

UFO LEDLights Home Depot

The lighting plan will show you the average, minimum, and maximum foot-candle readings in the space. This is an indication of whether the selected light is capable of providing sufficient, bright light. It will show you how balanced the light is (look for a low average/min ratio). The objective of the plans we provide is to show you bright and uniform lighting.

Eye Hook: Common on UFOs, these allow you to hang or suspend the UFO from the same mounting like metal halide lights. Chain or cable: This allows you to hang the high bays from chains or cables attached to the ceiling. Common in linear panel high bays. Pendant: Suspending the lights from a rigid pendant or rod attached to a junction box mounted on the ceiling. Surface: Directly mounting the lights to the ceiling. The best option for low-ceiling applications. Yoke: Attach the lights to yoke brackets or mounting arms installed on the ceiling or walls.

Over the past 145 years, Blackwoods has grown from being a small marine supply business on the banks of Sydney Harbour, to where we are today, Australia’s largest provider of industrial and safety supplies. Today we support businesses, big and small, with our range of over 200,000 products from the world’s best brands. With unrivalled expertise and the ability to bring together the best of the best, we have earned our place as Australia’s first choice for industrial and safety products and services including PPE, welding and gas, power tools, hand tools, workwear and much more. Blackwoods is proud to provide products and services that are essential to the economic growth and prosperity of our country. Everyday we help more people to build a better Australia.

High Bay LEDlights

LED Lights can easily replace metal halide and fluorescent lighting. What does that mean for you? How much can you expect your lighting bill to drop? Here are some examples of converting Metal Halide and fluorescent lighting over to LED. For this discussion, we will assume the following:

We offer a variety of optic packages to ensure the work area and floor are brightly lit, even from heights 40 feet or higher.

Many of our high bays are available to purchase online, however, we are also here to help and guide you if you have questions or specific needs. We would be more than happy to provide a free lighting plan so you can see how well our lights will work in your space.

HyperliteLED High Bay Light200W

You can expect to save 50% when converting from metal halide or fluorescent lighting. If you add motion sensors, you can expect to save up to 90% in areas where motion is less common.

The shape of the LED fixture is not important in determining which may be better. Focus on quality of light, reliability, and dependability of the fixture, the warranty, and the trustworthiness of the supplier.

Please submit the enquiry form with the details to obtain the price of a product. A Blackwoods representative will contact you for valid enquiries.

Our primary recommendation is 5000K, and a good second option is 4000K. We also recommend color-adjustable high bays that allow you to select and customize the color temperature you want.

UFO LED Lights are the best one-for-one replacement for metal halide high bays. They can easily replace any metal halide wattage from 250 Watts to 2000 Watts and provide energy savings of 50% or greater.

Any ceiling with a height of 20 feet or higher is perfect for these fixtures. For high ceilings (> 30 feet), you might need a more powerful high bay or consider using a tighter beam angle (60 or 90 degrees.