To set the ONESTEP into place, drop it in a collapsed position between your tires, and simply step down in the center. This will flatten the arms against the ground and press the steel sides firmly against each tire, preventing unwanted rocking and rolling. To remove, pull the attached cable upward. The arms will easily release, allowing you to remove it from between your tires.

Bestmagneticwork light formechanics

After determining the most secure measurement for your trailer, the ONESTEP easily slides into place and can be set, locked, and removed from a standing position. It is considerably faster and easier to use than chocks that require ratcheting, saving you time and hassle.