With a reflective orange shell and internal LED light,Collapsible Cones can be used and seen anytime, anywhere, and folding down to a 5cm high base, storage is not an issue.

All manufacturer names, symbols, and descriptions used in our images and text are solely for identification purposes only. It is neither inferred nor implied that any item sold by iJDMTOY is a product authorized by or in any way connected with any manufacturers.

Our retractable 450mm (1' 6") Traffic cones, also called road cones, safety cones, pylons, or Witches' Hats, are cone-shaped markers that are placed on roads or footpaths to temporarily redirect traffic in a safe manner. They are often used to create 'merge lanes' during road construction projects or auto accidents.

iJDMTOY.com automotive lighting was founded in 2004 and is now one of the largest car &truck LED lighting retailers in the United States. Our company is located in the suburb of Los Angeles, California, with the most complete LED lights and accessories for all cars and trucks including LED headlights, tail lamps, LED daytime running lamps, foglamps, off-road truck lightings, LED light bars, LED strip lights..... Read More>>

6. Run wiring for front LED Rock Lights along the fender liner and up through the fender into the engine bay and wiring them to headlight or fog light +/- or run a switch.

This page will show you the diagram on how to install the 4-piece set LED rock light kit.(50-070-White) There are some drilling, cutting and wiring required for the installation.

3. Drill mounting holes in each fender liner with a 1/4” drill bit. NOTICE: Use caution when drilling holes to ensure best possible fit of product.

All manufacturer names, symbols, and descriptions used in our images and text are solely for identification purposes only. It is neither inferred nor implied that any item sold by iJDMTOY is a product authorized by or in any way connected with any manufacturers.

5. Run wiring for rear LED Rock Lights along the pinch seam, securing with zip ties where necessary, and up through the fender into the engine bay. TIP: To help guide wiring through fender, drop a piece of string down the fender, tie to wiring, and pull up.

1. Place LED Rock Light on rear fender liner in front of the wheel, mark mounting location, and remove fender liner. NOTE: These are suggested mounting points only.

4. Install LED Rock Lights on fender liners using the Flat Mount rubber spacers, screws, nuts, 10mm wrench, and 6mm Allen Key. Once finished, reinstall fender liners.

Our retractable traffic cones are designed to be highly visible and easily movable. Various sizes are used, these are 450mm high. Our retractable Traffic cones can come in many different colors, with orange, yellow and red being the most common colors due to their brightness but at the moment we are only stocking orange! They may also have a reflective strip to further increase their visibility to vehicle traffic (Check out our class 1 reflective cones!).