Metal drip trayfor sale

​The Elecbrakes app provides the user with the ability to monitor, configure programs, and control brake response from the tow vehicle.

Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.

Metal drip traybunnings

Medium metal drip tray – Built toughAll Spill Crew trays are made right here in Australia and are built for our tough Australian conditions.Using a heavy duty galvanised steel the Spill Crew range of trays provides superior flammable and combustible resistance from a wide range of chemicals, oils and fuels.Integral grounding connectors for earthing if required.Features 100mm high walls for 56 litres sump capacityWhy use a spill tray?Protect workers and the environment from incidental spills, leaks and drips by safely storing and handling drums, containers, tanks, machinery and equipment in the workplaceThese spill trays capture liquids so slips and falls do not occur as a result of a slippery surface.The environment is protected from soil contamination and the trays prevent spilled liquids entering stormwater and drainage systems, thus protecting the broader environment from contamination.Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.

Largemetal drip tray

Suitable for caravans, trailers, horse floats, and boat trailers, the 10-minute plug-and-play setup eliminates the need to modify your tow vehicle. Complete with custom presets and a smooth proportional brake response, it's time for a seamless towing experience.

​Elecbrakes employs a high-speed microprocessor and various sensors that continuously samples the operating parameters at over 1,000 times per second. For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long-range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures the device can be mounted anywhere on the trailer's drawbar.

Metal drip trayaustralia

Simple to set up in minutes, the Elecbrakes electric brake controller can be mounted on any trailer and towed by any vehicle.

Elecbrakes Bluetooth electronic brake controller is revolutionising the towing process by eliminating the need for modification to your tow vehicle. Designed and assembled in Australia, this simple-to-use brake controller can be fitted to any trailer. It is controlled through Bluetooth and can be synced to any Smartphone device (Android or Apple) or the optional Elecbrakes Remote Control.

Why use a spill tray?Protect workers and the environment from incidental spills, leaks and drips by safely storing and handling drums, containers, tanks, machinery and equipment in the workplaceThese spill trays capture liquids so slips and falls do not occur as a result of a slippery surface.The environment is protected from soil contamination and the trays prevent spilled liquids entering stormwater and drainage systems, thus protecting the broader environment from contamination.Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.

Why use a spill tray?Protect workers and the environment from incidental spills, leaks and drips by safely storing and handling drums, containers, tanks, machinery and equipment in the workplaceThese spill trays capture liquids so slips and falls do not occur as a result of a slippery surface.The environment is protected from soil contamination and the trays prevent spilled liquids entering stormwater and drainage systems, thus protecting the broader environment from contamination.Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.

Metal Drip Traysupercheap

Heavy dutymetal drip tray

Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.

1.5mtr leader pre-wired with matching Deutsch plug, allows leader to be internally routed through trailer chassis as required Each[...]more >>>

largemetal tray- bunnings

Testing As this is a proportional controller this system may struggle to show braking on rollers during WOF testing when the tow vehicle is not moving.  In these situations, it is recommended to select Programme 5 and set the minimum level to 50-60% this will activate the brakes when the brake pedal is applied in the tow vehicle.

The regulations state that over 2500kg and under 3500kg that a vehicle must have a direct service brake system - this service brake system allows the driver of the towing vehicle to directly and progressively regulate the trailer brake effort from the driving position. This includes vacuum-operated brakes and pneumatic over hydraulic systems, controlled directly by the driver of the towing vehicle. The Elecbrake system is compliant when the remote or phone with the app is plugged into a power source and are accessible to the driver in the vehicle.

​Housed in a tough fibre-reinforced housing and encased in urethane, ensuring the electronics are fully protected from water, dust, and vibration.

Elecbrakes in-car remote control. Allows user to control brake response, select user defined programs and activate trailer brakes only by the manual o[...]more >>>

​Elecbrakes EB2 is normally powered via the tail lights (headlights on power the controller), however, a second preferred Auxillary Power Input from the battery is also provided if the user has a prime towing vehicle. The system has been designed to continue operating even if the Bluetooth signal is interrupted or lost.

Medium metal drip tray – Built toughAll Spill Crew trays are made right here in Australia and are built for our tough Australian conditions.Using a heavy duty galvanised steel the Spill Crew range of trays provides superior flammable and combustible resistance from a wide range of chemicals, oils and fuels.Integral grounding connectors for earthing if required.Features 100mm high walls for 56 litres sump capacityWhy use a spill tray?Protect workers and the environment from incidental spills, leaks and drips by safely storing and handling drums, containers, tanks, machinery and equipment in the workplaceThese spill trays capture liquids so slips and falls do not occur as a result of a slippery surface.The environment is protected from soil contamination and the trays prevent spilled liquids entering stormwater and drainage systems, thus protecting the broader environment from contamination.Instructions for useCheck stored liquids are chemically compatible with Class 3 flammable liquids.Promptly remove any captured liquids from the sump.Check payload volume complies with sump capacity.