Looking to refresh your space effortlessly? Ozlighting's range of batten covers are the perfect solution for covering up old, tired ceiling fittings. Whether you're updating a room or just want a sleek, modern look, our batten covers are designed to give your space an instant makeover. With a variety of styles and finishes to choose from, these easy-to-install covers offer a stylish, seamless look that requires no electrical expertise. Give your ceiling a fresh new look with minimal effort—because a little upgrade can go a long way.

13 Dec 2021 — Welcome to the official website of Farming Simulator, the #1 farming simulation game by GIANTS Software.

If your vehicle’s harness has an H4 connector (see picture) then you can set aside the adapter harness and use the H4 connection on the lamp. If one of the terminals on your vehicle’s connector is at a 45° angle, you need to use the adapter harness to adapt the H4 connector to the 2E1 connector.

Nightrider. Nashua, New Hampshire. Formed in 1979, Nightrider hails from Nashua, NH with all four original members still together.

Can't find the answer that you we're looking for? Please fill out the following form and once answered, we will add it to our FAQ.

If your vehicle’s harness does not use a standard configuration, the male terminals can be removed from the adapter block with the aid of a small screwdriver to depress the small metal tabs holding them in the plastic housings. The male terminals can then be inserted into the appropriate position on your vehicle’s harness. Take care to prevent the terminals from shorting with each other or any other exposed metal by insulating them with electrical tape or heat shrink. Pay careful attention to the labels on the wires and ensure they are connected to the correct function on your vehicle. Turning on low beams in your vehicle should turn on only the top 3 optics of the lamp, while turning on the high beams should turn on the 4 smaller optics on the lamp, but not the larger circular optic.

Warning Signs alert workers of hazards or hazardous situations that is NOT neccessarily life threatening. The use of the black coloured hazard symbol with ...

The Ironman 4×4 rechargeable LED worklight combo is great for camping or keeping in the car for 4×4 trips. Large Work Light – This handy worklight packs a punch ...

The Explosive Hinged Sign is made for mining explosives and carrying vehicles on Mine sites. These signs can also be used for trucks transporting explosives on ...

Pro-Line 2" Ultra-Slim Straight LED Light Bar Kit. This next generation light bar features a low-profile and highly detailed injection-molded housing and ...

A classroom management tool to show noise level. Use your built-in microphone or plug in your USB microphone to enable this groovy noise level monitor.

EZ to install as shown on the HR video, just hook the contact loops around the Ram hooks, then twist the bulb so the LED chips are facing down and forward.

... radioactive sources themselves are stored within a metal container. A radiation sign or sticker should be placed on the container, the place of storage and ...

11 June 2015 — The car has running lights, brake lights, and turn signals all on separate channels. However the trailer lights only have 2 channels as the ...