The combination of high-power LEDs and the efficiency of these reflectors means fewer LEDs, less power draw, and less heat – and that means a more durable and high-performing driving light!

Scope 9” driving lights run a 5700 Kelvin colour rating – a colour most closely matched to that of daylight is easier on the eyes!

TECHNICAL SPECIFICATIONS: Frequency range - from rumble to wispy Resonance/Feedback range - from tame to insane Individual Filter levels - silent to beyond 11, for serious saturation-clipped sonic destruction

Four multi model filters with stereo capability, combined with a six-stage four-channel modulation sequencer Finally a filter bank that unifies the control of multiple parameters, enabling a spaghetti-free approach to formant animation fun

Hooded reflectors are hugely more effective and efficient, as the LED shines directly into them unlike a traditional reflector cup, where huge amounts of light is lost.

Dual Input and Stereo output, with Pan control for each filter in the stereo field. Input can be Mono [ CH1 - 1,2,3,4 ] or Dual [ CH1-1,2 CH2 - 3,4 ] Modulation Sequencer capable of being clocked, scanned, and interpolated CV inputs for sequencer Interpolated scanning, 1V/Oct frequency offset, Slew amount, Resonance amount, Clock or MIDI clock input for sequence animation, MIDI CC Memory slots for storing and retrieving Filter and animation setups, and retrieving preset formant, and chord based Filter setups

The Scope 9” driving lights feature 4 high-powered LEDs running through the centre of the light. The light, from these LEDs, is captured by our deep-dish reflector cups and projected out.

With lights this powerful, sometimes, you need to switch it down a bit. Approaching regional towns, reflective road signs increase in density, and can be very distracting to a driver.

- IP68 Protection against water and dust ingress- Case Breather, to allow hot air to escape to eliminate condensation and ensure a water tight seal is maintained- Case mounted LEDs, allow for fast heat dissipation, keeping the lights cool & LEDs bright- Virtually indestructible polycarbonate lens- Rust preventing facia with no front facing screws to capture and hold moisture DuPont powder-coated cast aluminium housing with stainless steel mount system. Centre and side pinning bolts for ultimate rigidity- 3 Year WarrantyALL THE NITTY GRITTY DETAILS- RAW LUMENS: 16,000 SINGLE | 32,000 PAIR- EFFECTIVE LUMENS: 10,800 SINGLE | 21,600 PAIR- LUMEN EFFICIENCY: 67.5%- LEDS: LUMINUS- LED CONFIGURATION: 6 X 12W & 4 X 10W HIGH OUTPUT LEDS- IP RATING: IP68 WATER & DUST INGRESS- 1 LUX RATING (SPOT): 1,250M SINGLE | 1,768M PAIR- 1 LUX RATING (COMBO): 1,050M SINGLE | 1,414M PAIR- LUX @ 10M: 7,400 SPOT | 4,722 COMBO- MAX POWER: 113.5W- CURRENT DRAW: ~12.6 AMPS @ 12V- KELVIN (COLOUR): 5,700K

Driving lights need to last. And we’ve ensured that these Scope driving lights, have all the necessary features to be a dependable purchase.

Amazing performance, with lower power draw, in a sleek package – get out of the dark ages and into a whole new world with Ironman 4×4 Scope Driving Lights.

Ironman 4x4, alongside most driving light manufacturers in the market, has been utilising traditional reflector cup technology for many years. Unfortunately, small, shallow reflector cups can be largely inefficient.

The 9” Scope driving lights can be dialed down at the touch of a button, cutting power by 80%. While still providing improvements over your vehicle’s stock high-beams, the power cut greatly improves the driving experience in these conditions.

FEATURES: Four filter blocks, with multiple models , including: 6db BPF [ pingable ] 12db BPF [ pingable ] 12db variable width BPF Comb Filter for Karplus Strom [ pluckable & flanger vibes ] All Pass filter [ crazy Phaser vibes ]

A SPOT and a COMBO version of the hooded reflector is available – the Combo driving light pushes more light out in a greater spread, while the Spot driving light puts all its effort into getting the light as far down the road as possible.

The 9” Scope driving lights, run a minimal 10 x 10-12W LEDs, which are directly mounted to the cast housing. Utilising the hugely efficient reflectors and less LEDs already generates less heat – couple that with clever mounting to the cast housing ensuring maximum performance and brightness over long periods.

The true brilliance in the Scope 9” driving light is the inclusion of the Hooded Reflectors which are positioned along the top and bottom of the light harnessing 6 x 12W high power LEDs.

The Scope 9” driving light boasts a whopping 1 LUX at 1.77km when operated as a pair of spot beam driving lights – while a pair of combos, is not far behind at 1.4km! Amazing performance, with lower power draw, in a sleek package, the Scope 9” driving light achieves greatness with upgrades in reflector technology.

Create dreamy swooshing 70’s phaser filter sweeps Phenomenal for phoneme vocal formant rasps and wheezes Plucking great for strumming Karplus Strong twangs, and pinging filter pings ! Or, turn your silk into shredded cabbage, with the built in bad-ass clipping-saturator

Our deep-dish reflector cups are up to 100% deeper than traditional cups, offering great improvements in light efficiency. This middle row of LEDs provide great light output directly in your sight line for an optimal driving experience.