At an intersection, if you are facing a Stop sign/line or a Give Way sign/line, you must give way to a vehicle coming from any other direction (Examples 18 and 19) except:

ASTM 3105 aluminum is environmentally friendly because of its high recycled content; 24.86% post consumer, 65.2% secondary content and only 9.89% virgin aluminum ingots. It can also be recycled for future use. Product life impacts the environment more than any other factor and this product is known for its reliability over competitor's products. This item is Made in America which reduces transportation costs, supply time and its environmental impact. Signs are recyclable and use recycled materials.

We manufacture the highest quality warning traffic signs made to the FHA guidelines (Federal Highway Administration) for traffic control devices. These W3-1 Stop Ahead Sign are professional sign grade aluminum, finished for long lasting performance and designed for easy detection, recognition, and legibility.

You must give way to all vehicles and pedestrians when doing a U-turn and a 3-point turn, except to drivers entering the road from a road-related area (like a car park) or from private property.see here

You must give way to all trains or trams on or approaching from any direction at level crossings. You must stop and give way to pedestrians between the edge of the road and a stationary tram.see here

Give waysignAustralia

If you are on a road where the traffic is merging from  two lines to one line, you must give way to a vehicle on your left or right if any part of that vehicle is ahead  of your vehicle. This is called the Zip Merge (Example 38).

A T-intersection is where two roads meet; one that continues and one that terminates. At most intersections, one road will physically terminate and it is important to understand which is the 'terminating' road and which is the 'continuing' road:

Stop signfine NSW

We also punch holes in the sign for easy mounting. The holes are 3/8 inch wide and are centered in the middle of the sign, top and bottom. These holes match standard sign posts.

If you are turning at an intersection, you must give way to any pedestrian who is crossing the road you are turning into (Examples 30 and 31). You must also Give Way to a pedestrian or bicycle rider who is entering or crossing a slip lane if you are turning left at the slip lane.

To give way to another vehicle or a pedestrian, means:(a) if that vehicle or pedestrian is stopped - you must remain stationary until it is safe to proceed.(b) in any other case - slow down and, if necessary, stop to avoid a collision.

If you are driving on a multi-lane road and want to move into another lane of traffic, either to your right or left, you must first check that it is safe to change lanes, give a change of direction signal clearly for long enough to warn other road users, and give way to traffic in the other lane (Examples 39 and 40). This also applies to bike lanes and where the road is wide enough for two lines of traffic but there are no lanes marked on the road (Example 41).

When driving into or out of a road-related area (such as a driveway or car park - see Glossary) or adjacent land, you must give way to all vehicles, bicycles and pedestrians on the road, footpath or road-related area (Examples 42 and 43).

UPS offers the best value for medium size packages. UPS has been moving towards a dimensional weight pricing model where the shipping charges are calculated on the package weight, package dimensions and area delivered. The UPS shipping cost is calculated at check-out and adds to the cost of the order.

If you are proceeding straight ahead and a pedestrian is intending to cross the road, you must drive with due care and attention and, if necessary, take action to avoid a collision.

Stop Ahead W3-1 signs shall be installed on an approach to a primary traffic control device that is not visible for a sufficient distance to permit the road user to respond to the device.

This item comes with a limited manufacturer's guarantee on the reflective sheeting. Product life listed above is for normal use.

YieldAhead sign

Alphabet Signs Inc, 91 Newport Rd, Suite 102, Gap, PA 17527 US Toll Free 800-582-6366, Fax 717-925-8323, Hours Weekdays 9:00am - 5:00pm EST

Give wayahead sign

You must give way to a police or emergency vehicle with a warning siren sounding or displaying red and/or blue flashing lights to ensure that it is provided with a clear and uninterrupted passage.

You must Give Way to any vehicles already on the roundabout. Remember to look out for bicycle riders at roundabouts. How to drive through single-lane and multi-lane roundabouts is described in more detail in the following section.

The Type XI Diamond Grade Reflective is made from 3M Series 4000 and exceeds specification ASTM Type XI proposed. It delivers optimal performance at all sight distances, as well as all light and weather conditions. It overcomes declining illumination from newer headlights, provides the level of luminance needed by older drivers, and accommodates drivers of larger vehicles. The reflective sheeting has 12 year durability.

You must give way to any vehicles on the roadway of a divided road you are entering through a break in a median strip (Example 36). The median strip might be a narrow grassed strip or wide enough to require a short 'crossover' road (Example 37).

This item is Made in America which reduces transportation costs, supply time and its environmental impact and keeps American jobs.

Continue driving straightahead sign

Examples 23 and 24, show a vehicle giving way when approaching the intersection where the terminating road is the 'stem' of the 'T' and there are no traffic lights, road markings or signs.

With over 33+ years experience, we've processed over 297,000 sign orders for name brand businesses in all industry sectors.

We use ASTM 3105 sign grade aluminum alloy that is long lasting and rust free even in harsh weather extremes. The heavy gauge sign grade aluminum is .080 inches thick and is not easily vandalized or bent. The aluminum is cleaned and degreased to ASTM B-499 specifications as pretreatment for sheeting applications. A chromic acid conversion coating is applied for weather resistance and the edges are smoothed to prevent injury.

Stop signrules NSW

Before starting to turn right, you must give way to vehicles approaching from the opposite direction to you, including vehicles turning left (Examples 28 and 29), but not if they are turning left from a slip lane (Example 20). If you are driving on a continuing road at a modified T-intersection and intend to turn into the terminating road, you are 'turning right' and you must give way (Example 27) to oncoming traffic on the continuing road. You must also give a right turn signal.

All traffic signs must now be reflective, according to the Federal Highway Administration. The signs come in three grades of reflectivity (technically named retro reflectivity as a measure of reflecting light back to its source); Type I Engineer Grade, Type IV High Intensity Grade, and Type XI Diamond Grade. This product conforms to USDOT FHA standard specifications for construction of roads and bridges on federal highway projects, 1985 FP-85, Type II, Section 718.01. The reflective sheeting is chemical resistant and can withstand temperatures up to 160°F.

A slip lane is an area of road for vehicles turning left that is separated at some point by a painted island or traffic island.

We offer signs in optional sizes. The size of the sign required is a function of speed and viewing distance. The faster a motorist is traveling then the further distance they will need to see the sign from. A larger sign can be read from a further distance. The MUTCD has correlated sign sizes by the type of road a motorist travels; Bike Path, Minimum, Standard, and Expressway.

On a multi-lane road, this only applies to the left lane. If the left lane is a bike lane or is obstructed (e.g. a parked car), drivers in the lane next to the left lane must also give way.

Importantly, if you are approaching a Give Way sign/line, and there is no danger of colliding with another vehicle or a pedestrian or bicycle rider crossing the road, you do not have to stop at the Give Way sign/line before proceeding but you must slow down and prepare to stop if this becomes necessary.

This item ships UPS Ground to the continental US and once shipped, normally takes 2-5 business days to arrive in transit. UPS is one of the largest shipment and logistics companies in the world. UPS delivers more than 15 million packages a day to more than 6.1 million customers with exceptional real time tracking and notifications.

You must give way to any vehicle, including bicycles, approaching from the right at an intersection not controlled by signs or traffic signals and not a T-intersection. This is known as the 'Give Way to the Right' rule (Examples 32, 33, 34 and 35).

SignalAhead sign

The Type I Engineer Grade Reflective is made from Nikkalite EG reflective sheeting. It exceeds ASTM D4956 Type 1 standards for retro reflectivity which is visible in daytime or nighttime from a wide range of angles. The reflective sheeting has 7 year durability.

You must give way to any pedestrian or bicycle rider on, or entering the slip lane and to any vehicle approaching from your right including an oncoming vehicle that has turned right at the intersection (Example 20).

You must also give way to any vehicle or pedestrian at or near a Stop sign/line or Give Way sign/line at any other place.

If you are on the terminating road, you must give way to all vehicles approaching from either direction on the continuing road and to any pedestrian at, near or crossing a continuing road.

When leaving a parking space at the edge of the road or moving off from the kerb, you must give way to any vehicles, including motorcycles and bicycles, travelling along the road. You must also give a change of  direction signal for at least five seconds to warn other road users.

At intersections without traffic lights, road signs or road markings, that are not T-intersections, you must give way to any vehicle approaching from your right. This is known as the ‘Give Way to the Right’ rule.

The stroke and spacing of the letter style for these W3-1 Stop Ahead Sign are also designed and field-tested for maximum readability and conform to the design requirements of the Federal Highway Administrations Manual on Uniform Traffic Control Devices.

Examples 25 and 26, show that when turning right from the continuing road, you must also give way to any approaching traffic including any vehicle turning left into the terminating road.

Give waysign

Title 23 of the Code of Federal Regulations, Part 655.603 states that for the purpose of MUTCD applicability, the phrase "open to public travel" includes toll roads and roads within shopping centers, parking lots, airports, sports arenas, and other similar business and recreation facilities that are privately owned but where the public is allowed to travel without access restrictions.

If turning left or right at the intersection, you must also give way to any pedestrian crossing the road you are entering.(Example 23).

It doesn’t matter if one vehicle is turning and the other going straight ahead, at an intersection not controlled by signs or traffic signals, that is not a T-intersection, you must give way to the right.

Shipping to AK and HI needs to be quoted and we will email you an invoice for the total cost before the order is processed. We are not set up for international shipments. We do not ship COD or bill to third parties.

The Type IV High Intensity Reflective is made from 3M Series 3930 and exceeds specification ASTM D 4956-04. It has a tougher topcoat that aids against scuffs and scratches. The vivid daytime colors provide 24 hour performance and the improved optical package increases nighttime visibility. The reflective sheeting has 10 year durability.

The Stop Ahead Sign, W3-1 Outdoor Reflective belongs in the Business & Industrial > Signage > Road & Traffic Signs category.

When in a built-up area, you must give way to any bus displaying the Give Way to Buses sign if the bus is indicating to move out from the kerb.

The Zip Merge does not apply where lane lines are marked between the vehicles and one lane is ending (Example 39) such as at the end of overtaking lanes and when entering the freeway.