Lead acid batteries like this 68MF automotive battery or Marine Pro 780 here have a multitude of battery ratings listed across the top. But how do we make sense of them, and do they really matter? Let’s take a look.

Toxic hazardmeaning

When it comes to choosing a replacement car battery, a lot of people will tell you “higher CCA’s are better”, and that there is somehow a correlation between a higher CCA rating, and a longer lasting battery.

Radiationhazard sign

Even though the lids are permanently sealed, if you handle these batteries roughly there is a chance that the sulphuric acid inside can escape. For example, if you accidentally dropped the battery on concrete, or if you tipped it sideways or upside-down for extended periods of time.

You may have heard the phrase “You get what you pay for” and this is particularly true when it comes to Lithium Deep Cycle batteries. It seems like every man and his dog is out to sell you a Lithium battery these days, so why should you consider stepping up to a Century Lithium Pro battery when there are so called lower cost, cheaper players in the market.

Caution biologicalhazard sign

CorrosiveHazard sign

Sometimes safety tips like these can seem a little heavy-handed. But accidents are just that – accidents. They’re things you didn’t think could or would happen. So by taking a few simple precautions, you can keep yourself and others around you safe.

We also need to make sure that we aren’t wearing any jewellery on our hands, arms or around our neck – as these items pose a huge safety risk in the event of an accidental short circuit. Imagine if you’re using a spanner to undo the terminal and you accidentally create a short circuit through the spanner and through your ring. This massive flow of current could potentially heat the spanner and your ring up to hundreds of degrees in just a fraction of a second. So don’t take the risk – remove these items and pop on a set of gloves.

If you need to charge a lead-acid battery, it is important to use a correctly sized battery charger – and you can work that out by calculating 10% of the battery’s Ah rating. For a 60Ah battery, a 6-amp charger would be perfect. We’ve got an entire video on that which you can check out – but the takeaway here is higher amp chargers can overheat and permanently damage your battery during the charging process. This can boil the electrolyte and accelerate the release of hydrogen gas – reinforcing the importance of a well ventilated environment.

Caution laser beam risksign

Lead-acid batteries pack a lot of power and it’s always important that we treat these things with respect. Whilst it might seem a bit over the top, we always recommend wearing eye protection and gloves whenever you’re working near batteries.

Lead-acid batteries pack a lot of power and it’s always important that we treat these things with respect. Whilst it might seem a bit over the top, we always recommend wearing eye protection and gloves whenever you’re working near batteries.

Toxic hazard signmeaning

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Battery acid - or electrolyte as we call it - is serious stuff. It can destroy clothing and burn your skin, so extreme caution must be used when handling these things. If electrolyte somehow splashes in your eye, force the eye open and flood it with clean, cool water for at least 15 minutes – and get prompt medical attention. If electrolyte is taken internally, drink large quantities of water or milk and do not induce vomiting. Again, get prompt medical attention.

NOTICE: You are using an unsupported browser, some features on https://www.seton.net.au/ may not be available. We recommend using Google Chrome or Firefox. If problems persist you may place your order over the phone: Contact Us

Baking soda can be used to neutralise any electrolyte that has been spilt in a vehicle or in the workshop, before the area is rinsed with water.

Lead-acid batteries contain sulfuric acid and produce hydrogen gas even when the vehicle is not in operation – so it is vital to always keep them in a well-ventilated environment – and ensure that no sparks, flames or cigarettes ever go near it. Most batteries have integrated flame arrestors which prevent an external flame from passing through and igniting the battery, but caution still needs to be taken.

Back in the old days, batteries had vent caps which you could remove to top up electrolyte. But most batteries today are sealed maintenance free – and even though this one looks like it might have a part here you can pop off – I can assure you it is sealed for life. Attempting to remove the top from an SMF battery will permanently damage it and should not be attempted at any time.