There are two kinds of type B LED tubes, which are single ended power and double ended power LED tube. Single ended power LED tube need rewire, but it’s cheaper. Double ended power LED tube can work directly on fluorescent light fixture after remove ballast.

【Super Magnetic Design】Trailer led lights have a magnetic base with six magnets inside, easy to install and remove without wiring. 2.4G transmitter provides a working range of 100 feet. It allows the taillight to easily attach to the rear of the trailer, perfectly solving the problem of shortening the life of the taillight due to damaged wires and poor contact. 【High Performance】LED trailer lights have 4 lighting modes: Running Lights (14 LEDs), Brake Lights (10 LEDs), Turn Signals (10 LEDs), and License Plate Lights (4 LEDs). Battery Indicator (4 blue LEDs). Align with the headlights, both at night and during the day, to improve your safety while driving. 【Rechargeable & Rainproof】Magnetic towing lights use built-in batteries, only need to charge 2.5 hours to use 8 hours. The dual USB cables can be charged at the same time and reused without buying batteries, saving energy. IP67 Rated, can withstand rain, snow, dirt and sand, and adapt to all kinds of weather. 【High Quality Materials】Portable tail lights are made of high quality ABS plastic that is insulated, impact and shock proof. The magnetic base consists of rubber coated magnets that stick to any solid metal surface. Operating temperature is -25°C to 65°C, which withstands cold and hot weather. 【Wide Application】Applicable to trailers, trucks, tractors, semi-trailers, utility trailers, lorries, vans, campers, caravans, RVs, boats, motorboats, etc. Package Included: 2 x Magnetic Led Towing and Trailer Lights, 1 x 7-Pin Transmitter, 1 x Dual USB Charging Cable, 1 x USB Cigarette Plug Adapter, 1 x Manual

1. Disconnect main power before installation. 2. Cut the output wires on the ballast. You can either remove the ballast or keep it, it’s not useful in this case anyway. 3. Use a non-shunted lamp holder, and connect the N and L wires of the mains to the N and L ends of the lamp holder. 4. Install the bracket and the lamp. 5. Power up

How to Install Double Ended Power LED Tube Lights? 1. Disconnect main power before installation 2. Cut the output wires on the ballast. You can either remove the ballast or keep it 3. Connect the N and L wires to the mains with the 2-terminal lamp holder input wires 4. Install the bracket and the lamp 5. Power up

Consider Your Safety before Installation Please kindly note: installation of LED tube lights can be dangerous since you’re working with electricity. If you’ve never performed electrical tasks before, consider working with a knowledgeable partner throughout this process.

LED Magnetic Trailers Light Kit for Trailers, 2 PCS Rechargeable Towing Light with 7 Way to 4 Way Transmitter for Tow Trucks, Utility Trailers, Caravan, Camper, RVs, SUVs

Simply call us on with your special requirements and our experts will gladly help you find the best solution for your project.

All of our LED lighting solutions can be customised to your needs. We also offer free, no-obligation consultations, prototype development, sample testing and can assist with your development projects.