1. Adhere to the Speed Limit: Always drive within the specified speed limit to ensure safety and compliance with traffic laws.

The “Trucks Crossing or Entering” sign warns drivers that trucks may be crossing or entering the road ahead, requiring extra caution due to the potential presence of slow-moving or large vehicles.

3. Use High Beams: When driving at night, use high beams to better illuminate the road ahead (but dim them for oncoming traffic).

2. Observe Time Restrictions: Note the times and days when the permit is required (in this case, 9 AM to 4 PM, Monday to Friday).

5. Observe Road Signs: Pay attention to additional signage that may provide further instructions or indicate lane changes.

The “Dip” sign alerts drivers to a dip in the road ahead, which may cause vehicles to bounce or jolt if not navigated carefully.

3. Be Cautious: Even outside the specified times, consider whether stopping might still obstruct traffic or pose safety hazards.

The “Stock Crossing” sign alerts drivers to the presence of livestock such as cattle and sheep that may be crossing the road.

LEDtrailer flood Lights

The “Two-Way Traffic Ahead” sign warns drivers that the road ahead will switch from one-way to two-way traffic, requiring extra caution as vehicles will be coming from the opposite direction.

The “Staggered Side Road Junction” sign warns drivers of upcoming side roads that join the main road in a staggered manner, meaning they do not align directly opposite each other.

This sign indicates that drivers must turn in the direction shown by the arrow and are not permitted to go straight ahead.

This sign indicates that vehicles in the left lane must make a left turn. It is used to manage traffic flow and ensure vehicles in the left lane prepare to turn left.

3. Adjust for Conditions: Reduce speed further if road conditions are poor, such as during bad weather or heavy traffic.

This sign indicates that a crossroad intersection is ahead, where traffic can cross the main road from either direction.

Our Leisure LED Utility Floodlight comes in black or white to complement the exterior of your motorhome, camper, or trailer. It’s made of sturdy housing material so it’s durable and long-lasting.

These signs indicate designated areas for specific purposes, such as loading/unloading goods and construction works. They help manage road use and ensure safe and efficient operations in these areas.

The “Reverse Turn Sign, First to Left or Right” warns drivers of a reverse turn ahead, indicating a sharp change in direction.

The “Road Narrows” sign warns drivers that the road ahead will become narrower, indicating that there will be less room for vehicles to pass.

This sign indicates that the road you are on will end at a “T” intersection ahead. You must prepare to turn either left or right.

2. Check for Additional Restrictions: Look out for other signs that may affect parking regulations, such as no parking during street cleaning hours.

You need to be able to see everything around your campsite to feel secure and make the most of your outside space. The Leisure LED Warrior Exterior Utility RV Floodlight helps you get all the outdoor light you need for your RV life.

The “Railway Level Crossing on Road Ahead (Skewed)” sign alerts drivers that they are approaching a railway level crossing where the tracks cross the road at an angle.

3. Stay Safe: Ensure you maintain a safe distance from buses to avoid collisions and give them enough space to maneuver.

The “Lane Allocation Ahead” sign informs drivers about the allocation of lanes ahead, indicating the specific lanes designated for different traffic directions.

5. Follow the Flow: Adhere to the sign’s instructions to maintain smooth traffic flow and avoid unnecessary lane changes.

The “Warning for Animals” sign alerts drivers to the presence of wild animals that may cross the road. These signs depict specific animals common to the area, such as kangaroos, koalas, camels, emus, horses, and a general “wild animals” warning.

This sign instructs drivers to yield to buses, particularly when buses are merging back into traffic from a bus stop or lane. The goal is to facilitate the smooth re-entry of buses into the flow of traffic, ensuring that public transportation operates efficiently and without unnecessary delays.

2. Taxi Zone: Reserved for taxis. Other vehicles should avoid stopping or parking here to keep the area clear for taxis.

The “Falling Rocks” sign warns drivers that they are entering an area where rocks may fall onto the road from a cliff or steep slope.

These signs indicate restrictions on specific types of vehicles and pedestrians from entering certain areas. They are used to ensure safety, manage traffic flow, and prevent congestion in areas where these types of vehicles or pedestrians are not allowed.

5. Observe Local Laws: Be aware of specific speed limits in school zones, residential areas, and construction zones, which may differ from general road limits.

This sign indicates the presence of a median turning lane, which allows vehicles to make left or right turns from the centre of a road. It is designed to improve traffic flow and safety by providing a designated space for turning vehicles.

This sign indicates that overtaking or passing other vehicles is prohibited in the designated area. It is used to ensure safety on roads where such manoeuvres could be particularly dangerous.

4. Check Blind Spots: Always check your blind spots for vehicles, cyclists, or pedestrians before changing lanes or turning.

Tail Light forTrailer

1. Move to the Correct Lane Early: Ensure you are in the correct lane well before reaching the intersection if you need to go straight or left.

1. Reduce Speed: Approach the curve with caution and reduce your speed to ensure you can navigate both the curve and the intersection safely.

There are a lot of signs and information in this list so we recommend using the search function on your phone or computer to find a specific sign. We have categorised them into 5 main categories which are:

The “Merging Traffic from Left or Right” sign alerts drivers that vehicles will be entering the main road from a side road on either the left or right side.

Understanding Australian Road Signs can sometimes feel like deciphering a complex language. Road signs play a crucial role in guiding drivers, cyclists, and pedestrians, ensuring everyone’s safety and maintaining an orderly flow of traffic.

This sign indicates the end of a speed limit zone, allowing drivers to travel at any speed that is safe and appropriate for the conditions, within the bounds of general speed laws.

The “Pedestrian Crossing Ahead” sign alerts drivers that they are approaching a designated pedestrian crossing area and should be prepared to stop.

The “Reverse Curve Sign, First to Left or Right” warns drivers of an upcoming series of curves, first bending to the left and then to the right (or vice versa).

This sign indicates that drivers are allowed to make a left turn at a red traffic light, provided they come to a complete stop first. This rule is applicable only when the sign is posted.

This sign indicates that drivers must come to a complete stop at the intersection or junction. It is a regulatory sign that ensures safety and right-of-way.

The “Grid” sign alerts drivers that they are approaching a cattle grid, which is a device used to prevent livestock from crossing.

The “Narrow Bridge” sign alerts drivers that they are approaching a bridge with a width restriction and should be prepared for a narrower road.

12V LEDFlood LightsWaterproof

1. Avoid Driving in These Lanes: Only drive in bus lanes if permitted (e.g., taxis or emergency vehicles may be allowed).

This sign indicates a zone where parking is restricted to vehicles that have a valid permit. The time and days during which the permit requirement is enforced are specified on the sign.

4. Observe Traffic Lights: If at a signalized intersection, follow the traffic lights and wait for the appropriate signal before turning.

The “Give Way Sign Ahead” alerts drivers that they are approaching an intersection where they must yield the right-of-way to other vehicles.

The “Staggered Side Road Intersection, First from Left/Right” sign indicates staggered side road intersections ahead, with the first side road appearing from the left or right, respectively.

5. Follow Additional Signs: Be aware of any additional signs or signals that might further regulate traffic at the intersection.

This sign indicates the recommended maximum speed at which drivers should exit a motorway or main road to ensure safety.

5. Safety First: Even in a transit lane, adhere to speed limits and drive safely, respecting all traffic rules and other road users.

• Colour Scheme: The sign has a black bicycle symbol above the word “LANE” in black text on a white background, framed by a black border.

The “Series of Curves Ahead, First to Left/Right” sign warns drivers of a series of upcoming curves in the road, with the first curve being to the left or right.

3. Stay Alert: These signs are often placed in high-traffic areas; follow the regulations to avoid fines and ensure smooth traffic flow.

The “Railway Level Crossing on Side Road” sign warns drivers of a railway crossing located on a side road, either to the left or right of the main road.

The “Side Road Intersection on a Curve to Left/Right” sign warns drivers of a side road intersecting with the main road on a curve, either to the left or right.

4. Increase Following Distance: Keep extra space between your vehicle and the one in front to react to any sudden stops.

This sign indicates the maximum speed limit for a specific area. It is a regulatory sign used to enforce speed limits to enhance road safety.

3. Watch for Additional Signs: There may be other signs indicating the direction or path vehicles should take, so pay attention to all road signs in the area.

The “Hairpin Bend” sign warns drivers of a sharp turn ahead, resembling a hairpin shape, indicating a sharp curve either to the left or the right.

1. Stay in Your Lane: Pedestrians should use the designated pedestrian lane, and cyclists should use the designated cycling lane.

4. Be Courteous: While there’s no time limit, consider moving your vehicle if it’s been parked for an extended period to allow others access to the space.

• Additional Information: At the bottom, it states “EXCEPT AS SIGNED,” indicating that there might be specific conditions or exemptions in other signs.

3. Observe Speed Limits: Adhere to posted speed limits and adjust your speed according to road conditions and traffic flow.

3. Stay Safe: If you must stop in the emergency lane, ensure your hazard lights are on and, if safe, exit the vehicle and stand away from traffic.

1. Do Not Enter: Obey the sign and do not attempt to drive past it, as this could lead to traffic violations or accidents.

3. Lane Discipline: Avoid staying in the right lane if you are not overtaking, as this can cause congestion and frustrate other drivers.

3. Plan Your Route: If you miss a turn, proceed to a location where U-turns are permitted or safely turn around using other legal manoeuvres.

3. Respect Each Other: Both pedestrians and cyclists should be mindful of each other’s space and avoid crossing into the other lane.

These signs indicate lanes or areas designated exclusively for buses and bicycles, respectively. They are used to ensure the safe and efficient flow of specific types of traffic.

These signs indicate the beginning of a freeway or an entrance to a freeway, signalling drivers to adjust their driving to freeway conditions.

The “Exit Advisory Speed with Hairpin Bend” sign indicates the recommended speed for navigating an exit ramp or turn that involves a hairpin bend, starting to the left or right.

This sign indicates a lane that is designated solely for emergency stopping. It is used to provide a safe area for vehicles to stop in case of an emergency without obstructing the flow of traffic.

• Colour Scheme: The sign has a black bus symbol above the word “LANE” in black text on a white background, framed by a black border.

3. Use Other Lanes if Alone: If you’re driving alone, use the other lanes outside the transit lane during the restricted times.

The “Side Road Intersection from Left or Right” sign warns drivers of a side road intersecting with the main road from either the left or the right.

This sign indicates that a crossroad intersection is ahead on a curve, which could be either to the left or the right depending on the direction of the curve.

• Colour Scheme: The sign has a black truck symbol above the word “LANE” in black text on a white background, framed by a black border.

2. Observe Traffic: Be extra vigilant for vehicles entering or crossing the intersection, as they may be harder to see due to the curve.

5. Check for Signs: Look for additional signage or signals that may control the intersection, such as stop signs or traffic lights.

3. Stay Alert: These signs are often placed in areas with additional hazards, so maintain high awareness and follow the speed limit.

This sign indicates an alphanumeric route, combining letters and numbers to designate a specific road or highway within a network.

This sign indicates that overtaking or passing other vehicles is prohibited in the designated area. It is used to ensure safety on roads where such manoeuvres could be particularly dangerous.

3. Outside Time Limits: You may be able to park for longer periods outside of the specified hours, but always double-check for any other signs or regulations.

2. Turn Around Safely: Check for traffic and turn around safely, preferably at a point where you have enough visibility and space.

This sign instructs drivers to stay in the left lane unless they are overtaking another vehicle. It is designed to ensure smooth traffic flow and reduce congestion, particularly on multi-lane roads and highways.

Our versatile Warrior Exterior RV Floodlight functions on a broad range of voltages. Designed for 10-24 volts you can count on these lights if your 12-volt battery is running low, and you can use it in a 24-volt application.

The “Exit Advisory Speed with Reverse Curve” sign indicates the recommended speed for navigating an exit ramp or turn that involves a reverse curve, starting to the left or right.

1. Observe Restrictions: Ensure that if you are a pedestrian, cyclist, or operating a tractor or transporting animals, you do not proceed beyond this point.

These signs indicate a curve in the road ahead, directing drivers to slow down and be prepared to turn in the indicated direction.

This sign indicates a transit lane, often referred to as a T2 lane, which is designated for vehicles carrying at least two occupants, including the driver, during specified times.

This sign indicates the presence of a crest in the road ahead, warning drivers to be cautious as their view of the road beyond may be obstructed.

This bright, bright LED RV light produces 1100 lumens of cool white light at around 6,500K. It’s powered by 56 high-powered 2835 LED chips.

These signs are crucial for ensuring the safety of both motorists and trains, preventing collisions at railway crossings.

2. Check for Additional Signs: Ensure there are no other parking restrictions in the area, such as street cleaning times or temporary no-parking signs.

These signs indicate specific areas reserved for certain types of vehicles to stop or park. Each zone is designated for the corresponding vehicle type, ensuring smooth traffic flow and efficient use of space.

Remember, this Leisure LED RV light is not designed for household use. It’s designed for 12 volt or 24-volt applications.

2. Observe Time Restrictions: Note the times when the transit lane rules are in effect (e.g., 6 AM – 10 AM, Monday to Friday).

• Text: Below the symbol, the sign indicates the word “AREA” and specifies the times when stopping is prohibited, such as “7 AM – 12 NOON” and “12 NOON – 9 PM”.

The “Priority Side Road Intersection from Left or Right” sign indicates that drivers on the main road have priority over vehicles entering from the side road.

2. Alternative Routes: Use alternate paths or routes if your vehicle type or if you are a pedestrian/bicyclist. Follow detour signs or use a map/GPS for guidance.

Trailerloadlights

The “Roundabout Ahead” sign alerts drivers that they are approaching a roundabout and should prepare to give way to traffic already in the roundabout.

5. Signal Your Moves: Cyclists should use hand signals to indicate their intentions to turn or stop, providing clear communication to pedestrians.

4. Watch for Changes: Be on the lookout for signs indicating a change in the speed limit as you enter or exit different zones.

2. Safety Compliance: These restrictions are in place for the safety of all road users. Adhere strictly to ensure safety.

2. Be Mindful of Conditions: Adjust your speed according to road, weather, and traffic conditions even if it means driving below the speed limit.

The “Railway Level Crossing with Flashing Signals Ahead” sign warns drivers of an upcoming railway crossing that is equipped with flashing signals to indicate the approach of a train.

This sign indicates that drivers must give way to traffic already circulating within the roundabout. It ensures the smooth flow of traffic and prevents collisions within the roundabout.

The “Exit Advisory Speed with Curve” sign indicates the recommended speed for navigating an exit ramp or turn that involves a curve, starting to the left or right.

The “End Divided Road” sign informs drivers that the divided road they are on will soon end, and they will transition to an undivided road.

This sign indicates that the road ahead will have two-way traffic, meaning vehicles will be travelling in both directions.

The “Traffic Hazard Ahead” sign alerts drivers to potential dangers on the road ahead, such as debris, accidents, or other unexpected obstacles.

3. Stay Informed: Be aware of the local regulations and restrictions that apply to specific areas to avoid entering prohibited zones.

Racetrailer Flood Lights

These signs designate specific lanes for bicycles, buses, and trucks. They help manage traffic flow and enhance safety by separating different types of vehicles.

2. Keep Right/Left: Maintain your lane position according to the country’s driving rules (right in some countries, left in others).

The “Side Road Intersection” sign warns drivers of a side road intersecting with the main road ahead, indicating a potential merging point for vehicles.

5. Be Cautious: Exercise extra caution when overtaking, ensuring there is enough space and time to safely pass other vehicles.

4. Be Cautious with High-sided Vehicles: Be extra vigilant around lorries, vans, and buses, as they are more affected by wind.

3. Stay Alert: These signs are often placed in areas with additional hazards, so maintain high awareness and follow the speed limit.

The “Double Side Road Intersection” sign warns drivers of two side roads intersecting with the main road, one after the other, from either the left or the right.

4. Do Not Swerve: If an animal is in your path, brake firmly and remain in your lane. Swerving can cause more severe accidents.

1. Stay Alert: Watch for vehicles entering or exiting from the side road, especially on curves where visibility may be reduced.

The “Traffic Signals Ahead” sign warns drivers of upcoming traffic lights, indicating they should be prepared to stop or adjust their speed accordingly.

2. Find Alternative Routes: Use other streets or paths to reach your destination. If you are unsure, follow detour signs or use a GPS for guidance.

This sign indicates an area where vehicles and pedestrians share the road space, with a strict speed limit to ensure safety.

These signs indicate areas where parking is prohibited. They can specify the times when parking is not allowed or indicate a general prohibition in the designated area.

• Text: To the right of the symbol, the sign usually indicates the specific times and days when stopping is prohibited, such as “4-6 PM MON – FRI”.

The Leisure LED Warrior Utility Floodlight is an excellent replacement light for broken, damaged, or dim RV lights. It will brighten your outdoor space, draw less power than your original lights, and last for years.

This sign indicates the end of a speed limit zone, such as 60 km/h. It informs drivers that the specific speed limit restriction has ended, and they can adjust their speed accordingly to comply with the new or general speed limits of the road.

3. Truck Zone: Designated for trucks, often for loading and unloading purposes. Other vehicles should not park in these areas.

The “Divided Road” sign indicates to drivers that the road ahead will split into a divided road, typically with a central median.

The “Staggered Side Road Intersection, First From Left/Right” sign indicates that there are staggered side road intersections ahead, with the first side road appearing from the left or right, respectively.

This energy-efficient LED exterior RV floodlight draws about 10 watts of power. That’s about 75% less than a standard halogen floodlight draws. With its 1100 lumens of light, one of these Warrior RV lights is probably equal to two of the lights original to your coach or 5th wheel.

There are some questions we hear a lot about LED lights, so we’re going to take the time to talk about some of those here.

Contact us at Leisure Coachworks to learn more about exterior RV lighting and our experts will help you choose the perfect light for your RV lifestyle.

• Restricted Areas: To prevent unauthorized vehicles from entering areas such as construction sites, military zones, or pedestrian-only zones.

This sign indicates the end of a speed-restricted zone. It informs drivers that they are leaving an area with a specific speed limit and can adjust their speed accordingly to comply with the general road speed limits.

This sign indicates a path where the space is divided into separate lanes for pedestrians and cyclists, ensuring that each group has a designated area.

This sign indicates that the area beyond the sign is restricted and prohibits pedestrians, bicycles, animals, and tractors.

The “Stop Sign Ahead” sign alerts drivers to an upcoming stop sign, indicating they should prepare to come to a complete stop.

The “Farm Machinery Sign” alerts drivers that they are entering an area where farm machinery, such as tractors, may be crossing or driving on the road.

The “Wind Gust” sign warns drivers of strong wind gusts that may affect vehicle control, particularly for high-sided vehicles.

This sign indicates that drivers must slow down and yield the right-of-way to other vehicles or pedestrians. If necessary, drivers should stop to allow others to proceed before continuing.

The No Entry sign indicates that vehicles are not allowed to enter a particular area or road. It is used to prevent traffic from entering a prohibited zone, such as a one-way street from the wrong direction or a restricted area.

The “Temporary Traffic Signals Ahead” sign alerts drivers to the presence of temporary traffic signals ahead, often used to control traffic flow during road works or emergencies.

The “Hazardous Road Surface Conditions Ahead” sign warns drivers of potentially slippery or dangerous road surfaces ahead, often due to weather conditions like rain, ice, or snow.

While we look at this super bright light, let’s check out some specifications. The unit is 8.5 inches wide, 9.5 inches tall, and 3 inches deep. The Warrior RV floodlight installs into a cutout as small as 6 inches wide, 6.5 inches tall, and 3 inches deep.

The “Roadwork Ahead” sign informs drivers that roadwork is taking place ahead, and they should be prepared for changes in traffic patterns, reduced speed limits, and potential delays.

4. Use Cruise Control Wisely: On long stretches of road, use cruise control to maintain a consistent speed and avoid speeding.

Trailer lights

These signs indicate that traffic is only allowed to flow in the direction indicated by the arrow, either left or right.

The “Low Clearance Ahead” sign alerts drivers that there is a height restriction ahead and vehicles taller than the indicated clearance height should not proceed.

In this blog, we’ll delve into some essential road signs that you’re likely to encounter. Understanding these signs not only helps in obeying traffic laws but also enhances road safety for all users.

2. Be Patient: Understand that the restriction is in place for safety reasons, and look for designated passing zones if you need to overtake.

This sign indicates a clearway, a section of road where stopping and parking are not allowed during specified times to ensure smooth traffic flow and prevent congestion.

This unique stop sign, incorporating the image of traffic lights, is designed to alert drivers to the presence of a traffic signal ahead.

The “Close Lane(s) Ahead” sign informs drivers that one or more lanes ahead are closed, typically due to construction or maintenance.

3. Avoid Fines: Parking in the permit zone without a valid permit during the restricted times can result in fines or your vehicle being towed.

The “Workers Ahead” sign warns drivers of road workers ahead and the need to proceed with caution due to the potential presence of people and machinery on or near the road.

Do you have broken or damaged exterior lights on your camper or trailer? Or maybe you have old RV lights on your coach that just don’t have enough power. Leisure LED has your solution.

1. Carpool Compliance: Ensure your vehicle has at least two occupants to use the transit lane during the indicated times.

This sign alerts drivers that they are travelling in the wrong direction on a road or highway and need to turn around immediately.

2. Stay Alert: Pay close attention to the road and surrounding areas, especially at dawn and dusk when animals are most active.

The “Priority Crossroad Intersection from Left or Right” sign informs drivers that the crossroad they are approaching has priority over their current road.

4. Look for Alternatives: If you don’t have a permit, seek alternative parking outside of the restricted zone or check if a temporary permit is available for visitors.

This sign indicates that the freeway is ending in 1 kilometre, and drivers will soon transition to regular road conditions.

1. Observe the Times: The speed limit is enforced during the times indicated on the sign, typically during school start and end times.

2. Signal Early: Indicate your lane change well in advance.3. Merge Smoothly: Move into the open lane(s) safely and steadily.

This sign indicates that vehicles in the left lane must take the next exit. It is used to manage traffic flow, especially near exits on highways or freeways, ensuring that vehicles in the left lane prepare to exit.

1. Stay Alert: Be aware of oncoming traffic and maintain a safe distance from vehicles travelling in the opposite direction.

3. Observe Local Laws: Always adhere to local parking regulations, as they may override the no-limit parking if special circumstances arise.

3. Check for Oncoming Traffic: Be prepared to yield to vehicles already on the bridge if it is too narrow for two-way traffic.

The “Tilting Truck” sign warns drivers, especially those operating heavy vehicles, of a sharp curve ahead that could cause trucks to tip over if taken at high speed. The sign often includes a recommended speed limit.

This sign indicates a school zone where a reduced speed limit is enforced during specific hours to ensure the safety of children and pedestrians.

The “Loose Stones or Gravel Ahead” sign warns drivers of loose stones or gravel on the road ahead, which can cause damage to vehicles and create hazardous driving conditions.

3. Check Vehicle: Ensure your vehicle is in good condition to handle the grid, especially if you have a low clearance vehicle.

4. Follow Crossing Guards: Obey the instructions of crossing guards who are present to assist children safely across the street.

4. Yield Right of Way: Follow the standard rules of the road, yielding to oncoming traffic or vehicles already in the intersection.

These signs indicate a railway crossing ahead. The two types shown have slightly different designs but serve the same purpose.

4. Increase Following Distance: Allow more space between your vehicle and others, particularly if you are driving a heavy vehicle.

2. Be Patient: Understand that the restriction is in place for safety reasons, and look for designated passing zones if you need to overtake.