Q: Why does the rock light kit come with 4 lights but 8 pod cables?A: This kit includes 4 rock lights, which will be connected to 4 pod cables. If you want to install more rock lights, you can purchase them separately, the extra rock lights are coming soon.

Grounding your flammable cabinet is not required by federal law, but it can help prevent fires caused by static electricity.

Here is my set-up: A. For LasFit switch: i. Remove (a.k.a. cut-off) the 3-way switch ii. Connect Red wire to Pin 87 of Amber light relay (Relay #1) iii. Connect Yellow wire to Pin 87 of White light relay (Relay #2) iv. Cap Black wire of LasFit switch (no need for this wire)

LEDRock Lights

Lasfit rock lights adopt hard and durable die-cast aluminum housing and thickened PC lens, which is resistant to scratches, heavy shocks, oxidation, high temperature, and paint, and is durable for long-time use. Besides, shock-resistant rubber pads keep you on rocky mountain terrain.

In most cases, yes. In 2011, OSHA clarified that flammables and combustibles can be stored together as long as no more than 120 gallons are stored in the same flammable cabinet.

The eight-pod rock lights have been working flawless in the last two weeks with OEM style CH4x4 dual function switch (Amber/White) in my Toyota 4Runner. I used two 4-pin relays for the CH4x4 switch, and designated Relay #1 as Amber light relay, and Relay #2 as White light relay. If 5-pin relay, no connection is needed for Pin 87A.

Here is my set-up: A. For LasFit switch: i. Remove (a.k.a. cut-off) the 3-way switch ii. Connect Red wire to Pin 87 of Amber light relay (Relay #1) iii. Connect Yellow wire to Pin 87 of White light relay (Relay #2) iv. Cap Black wire of LasFit switch (no need for this wire)

Here is my set-up: A. For LasFit switch: i. Remove (a.k.a. cut-off) the 3-way switch ii. Connect Red wire to Pin 87 of Amber light relay (Relay #1) iii. Connect Yellow wire to Pin 87 of White light relay (Relay #2) iv. Cap Black wire of LasFit switch (no need for this wire)

Lasfit switchback rock lights are officially launched with more beasts after rigorous testing! With just one button to switch back to white or amber, and no need to change filters or use a complicated Bluetooth APP, perfect for any weather conditions! If you're looking for a game-changer for your off-road adventures, the Lasfit Switchback Rock Lights are sure to take your off-road experience to the next level! Designed for off-road enthusiasts, these high-performance lights with a power output of 6 watts and 110° optics per pod are the perfect addition to any truck, like for Jeep, or SUV.

D. For both relays: i. Pin 86 Amber relay to Blue wire of CH4x4 ii. Pin 86 White relay to Green wire of CH4x4 iii. Pin 85 of both relays to ground or negative (-) battery terminal iv. Pin 30 of both relays to positive (+) battery terminal (note: recommend to connect after the LasFit Red wire with fuse) v. Pin 87 Amber relay to Red wire of removed LasFit switch vi. Pin 87 White relay to Yellow wire of removed LasFit switch

B. For LasFit wiring i. Connect Red wire with fuse to positive (+) battery terminal ii. Connect Black wire to negative (-) battery terminal

I ordered the 8 piece rock lights after experiencing the 42" lasfit lighbar. I've been very impressed by both the build quality and light output of lasfit products. These rock lights were extremely easy to install and the included switch to go from white to amber light is awesome!

Easy install, extra 4 wires if you want to add another set of lights in the future, fitment was overall easy and fit the truck wheel wells good and fully light up the entire well, and they are surprisingly brighter than I thought you can definitely see the amber during daylight

C. CH4x4 Switch (blue, red, black, yellow and green color wires): i. Connect Blue wire to Pin 86 of Amber light relay ii. Connect Red wire to positive (+) battery terminal iii. Connect Black wire to ground or negative (-) battery terminal iv. Connect Yellow wire to dash illumination (in my case, I tapped into the white color wire of the Windshield wiper deicer switch) v. Connect Green wire to Pin 86 of White light relay

Brightestrock lights fortrucks

Easy install, extra 4 wires if you want to add another set of lights in the future, fitment was overall easy and fit the truck wheel wells good and fully light up the entire well, and they are surprisingly brighter than I thought you can definitely see the amber during daylight

toyota/sequoia/2017 One rock light installed so far from the four light kit. It was so easy and I like it so much I am ordering four more. The lights also seem very sturdy.

ORACLERock Lights

OSHA requires flammable cabinets to meet certain standards. When ordering your next flammable cabinet or deciding on placement or usage of your cabinets, be sure to follow OSHA’s requirements.

At Lasfit, we use manufacturer names, symbols, and descriptions in our visuals and descriptions purely to help customers recognize products easily. It is neither inferred nor implied that our products are endorsed by or affiliated with the vehicle manufacturers shown on this page.

Our team at iQ Labs provides custom solutions and personalized designs for laboratories of all kinds. We offer shorter lead times than other manufacturers without sacrificing quality. If your laboratory needs a high-quality flammable safety cabinet, our team is here to help. Contact us today for more information.

This kit was exactly what i was looking for. Sturdy housings, plenty of length in wire, awesome light output and cant beat the price when compared to other "brand name" companies out there. Time will tell how long they last, but thats with anything. But id bet they last longer than those "big name" companies out there! I do wish that the switch they give you was illuminated.

This kit was exactly what i was looking for. Sturdy housings, plenty of length in wire, awesome light output and cant beat the price when compared to other "brand name" companies out there. Time will tell how long they last, but thats with anything. But id bet they last longer than those "big name" companies out there! I do wish that the switch they give you was illuminated.

Here is how my Amber rock lights work with CH4x4 switch: 1) press amber switch, battery power on CH4x4 red wire goes through CH4x4 blue wire and to Pin 86 of Amber relay. The power energizes the coil of Amber relay; Pin 30 makes connection to Pin 87, turns on Amber rock lights. It will be similar situation of White rock lights. Since Pin 30 & Pin 87 of both relays will always have battery power, I can turn on the rock lights without running the vehicle, so please be careful to turn off the rock lights. In addition, the set up for the CH4x4 dual function switch allows me to turn on both Amber and White rock lights at the same time. Thank you and have a good day.

The Lasfit switchback rock lights are suitable for trucks, Jeeps, UTVs, ATVs, motorcycles, tractors even boats to get a wider and brighter vision for your safety escort.

● Rock Lights*4● 13.12ft Power Cable*2 (For Rear Wheel Side)● 8.2ft Power Cable*2 (For Front Wheel Side)● Rubber Mounting Pad*4● 1 With 8 Pod Cable*1● Rock Light Hardware Kit*1● Zip Ties*26

The Occupational Safety and Health Administration (OSHA) defines a flammable liquid as “any liquid having a flashpoint at or below 199.4ºF and having a boiling point at or below 95ºF.” These flammable liquids are then divided into four categories based on different ranges of flashpoints and boiling points. A liquid’s flashpoint reflects its volatility (ability to generate vapor) and is necessary to know in cases where the vapor of the liquid, not the liquid itself, may burn and cause a fire.

Any flammable or combustible liquid should be stored in a flammable liquid storage cabinet. Common flammable liquids include:

WirelessRock Lights

They are usually installed on the bottom of the vehicle or on the fender on the wheel to add lighting under your truck. But rock crawling isn’t the only scenario that these lights are useful. These rock lights can also be engine bay lights, reverse assist lights, on deck or side rail lights for marine, rear cargo or canopy lights, ambient/camp scene lights, toolbox, caravan, and awning under lights, etc. The applications are endless!

Flammable cabinets should not be placed in such a way that limits or prevents people from using exits, stairs, walkways, or doors. Certain categories of flammable liquids may not be allowed to be stored in basements.

Rock Lightsinstallation near me

C. CH4x4 Switch (blue, red, black, yellow and green color wires): i. Connect Blue wire to Pin 86 of Amber light relay ii. Connect Red wire to positive (+) battery terminal iii. Connect Black wire to ground or negative (-) battery terminal iv. Connect Yellow wire to dash illumination (in my case, I tapped into the white color wire of the Windshield wiper deicer switch) v. Connect Green wire to Pin 86 of White light relay

I ordered the 8 piece rock lights after experiencing the 42" lasfit lighbar. I've been very impressed by both the build quality and light output of lasfit products. These rock lights were extremely easy to install and the included switch to go from white to amber light is awesome!

Rock Lightsnear me

Keep in mind that OSHA has developed separate regulations for the construction industry and shipyard industry. You may also have to adhere to regulations specific to your city or state. Contact your state and local fire marshals for more information.

● Time: 0.5-1h● Worry-free installation: Follow our installation manual with step-by-step detailed instructions, and you will be all set!● Call (909) 758-7900 for Technical Support

toyota/sequoia/2017 One rock light installed so far from the four light kit. It was so easy and I like it so much I am ordering four more. The lights also seem very sturdy.

You should only put flammable or combustible liquids in a flammable safety cabinet. Other hazardous materials, such as acids, bases, or corrosive liquids, should be stored in acid and corrosive storage cabinets or other types of storage units, not flammable cabinets. You should also avoid storing materials in a flammable cabinet that may ignite or feed a fire.

The white light is brighter with 6200K, and the amber light of 1900K has higher visibility. These two colors are usually the most useful for off-road enthusiasts, so we have adopted a dual-color design of white and amber light to meet real off-road needs: white is for sunny days while amber is suitable for rainy, snowy, and foggy days, the perfect solution for any weather conditions!

B. For LasFit wiring i. Connect Red wire with fuse to positive (+) battery terminal ii. Connect Black wire to negative (-) battery terminal

You don't need to change filters or use a complicated Bluetooth APP to get a multi-color version. The Lasfit dual-color rock lights switch back to white or amber with just one button and are specially designed for real off-road needs. Besides, we offer two lengths of cable, 4m for the rear wheel side and 2.5m for the front wheel side, with no extension required. It couldn't be easier!

Some states, like California, require flammable cabinets to have self-closing doors. This is to ensure that, in the event of a fire, the flammable cabinet doors shut and contain the flames, preventing spread. Regardless of whether or not your cabinet’s door is self-closing, it should have a three-point lock.

This kit was exactly what i was looking for. Sturdy housings, plenty of length in wire, awesome light output and cant beat the price when compared to other "brand name" companies out there. Time will tell how long they last, but thats with anything. But id bet they last longer than those "big name" companies out there! I do wish that the switch they give you was illuminated.

D. For both relays: i. Pin 86 Amber relay to Blue wire of CH4x4 ii. Pin 86 White relay to Green wire of CH4x4 iii. Pin 85 of both relays to ground or negative (-) battery terminal iv. Pin 30 of both relays to positive (+) battery terminal (note: recommend to connect after the LasFit Red wire with fuse) v. Pin 87 Amber relay to Red wire of removed LasFit switch vi. Pin 87 White relay to Yellow wire of removed LasFit switch

Easy install, extra 4 wires if you want to add another set of lights in the future, fitment was overall easy and fit the truck wheel wells good and fully light up the entire well, and they are surprisingly brighter than I thought you can definitely see the amber during daylight

B. For LasFit wiring i. Connect Red wire with fuse to positive (+) battery terminal ii. Connect Black wire to negative (-) battery terminal

D. For both relays: i. Pin 86 Amber relay to Blue wire of CH4x4 ii. Pin 86 White relay to Green wire of CH4x4 iii. Pin 85 of both relays to ground or negative (-) battery terminal iv. Pin 30 of both relays to positive (+) battery terminal (note: recommend to connect after the LasFit Red wire with fuse) v. Pin 87 Amber relay to Red wire of removed LasFit switch vi. Pin 87 White relay to Yellow wire of removed LasFit switch

toyota/sequoia/2017 One rock light installed so far from the four light kit. It was so easy and I like it so much I am ordering four more. The lights also seem very sturdy.

I ordered the 8 piece rock lights after experiencing the 42" lasfit lighbar. I've been very impressed by both the build quality and light output of lasfit products. These rock lights were extremely easy to install and the included switch to go from white to amber light is awesome!

A flammable cabinet is designed to safely store potentially flammable or combustible liquids. Instead of storing such hazardous materials on an exposed shelf, a flammable cabinet allows you to store flammable or combustible liquids in a container that is designed to prevent fires and smother flames.

Many people choose to place their flammable cabinets under fume hoods. This makes it more convenient to use flammable or combustible liquids in a laboratory setting.

Also, Lasfit rock lights can be applied through any wet terrain with IP68 waterproof, including mud, river, and snow, and can undertake any extremely evil conditions.

Lasfit rock light is brighter and wider with a true 6W power output and 110° optics, each light employs 10PCS high-quality led chips and delivers an incredibly bright 250 lumens (white) and 190 lumens (amber) of LED output to add light underneath your vehicle and enhance your visibility on the trail!

The eight-pod rock lights have been working flawless in the last two weeks with OEM style CH4x4 dual function switch (Amber/White) in my Toyota 4Runner. I used two 4-pin relays for the CH4x4 switch, and designated Relay #1 as Amber light relay, and Relay #2 as White light relay. If 5-pin relay, no connection is needed for Pin 87A.

Flammable cabinets are constructed to withstand a 10-minute fire test. During the test, the cabinet doors must remain closed, and the internal temperature of the cabinet must not exceed 325ºF.

Here is how my Amber rock lights work with CH4x4 switch: 1) press amber switch, battery power on CH4x4 red wire goes through CH4x4 blue wire and to Pin 86 of Amber relay. The power energizes the coil of Amber relay; Pin 30 makes connection to Pin 87, turns on Amber rock lights. It will be similar situation of White rock lights. Since Pin 30 & Pin 87 of both relays will always have battery power, I can turn on the rock lights without running the vehicle, so please be careful to turn off the rock lights. In addition, the set up for the CH4x4 dual function switch allows me to turn on both Amber and White rock lights at the same time. Thank you and have a good day.

RGBRock Lights

● Input Voltage: 9-24V● Input Power: 6W/Pod● Current Draw: 500mA±10%● LED Chips: 10pcs/Pod● Beam Angle: 110°● Wire Size: 24AWG● Fuse Size: 10A● Weight: 0.48Lbs/Pod● IP Rating: IP68● Material: Die-Cast Aluminum● Lumen(Max): 250(White), 190(Amberw)● Operating Temperature: -104℃~185°F● Color Temperature: 6200K(White), 1900K(Amber)

The eight-pod rock lights have been working flawless in the last two weeks with OEM style CH4x4 dual function switch (Amber/White) in my Toyota 4Runner. I used two 4-pin relays for the CH4x4 switch, and designated Relay #1 as Amber light relay, and Relay #2 as White light relay. If 5-pin relay, no connection is needed for Pin 87A.

Bestrock lights fortrucks

You can store up to 60 gallons of any category 1, 2, or 3 flammable liquid in a flammable storage cabinet. For category 4 flammable liquids, you can store up to 120 gallons in the same cabinet.

At Lasfit, we're dedicated to providing high-quality products and ensuring your satisfaction. If you have any questions, concerns, or feedback, we're here to help, please don't hesitate to reach out to us through the below form, our team is committed to ensuring you have the best experience possible.

Generally speaking, you need to have a flammable cabinet or other OSHA-approved method of flammable storage if you are using and storing flammable liquids. Industries that commonly use flammable cabinets include:

● Rock Lights*8● 13.12ft Power Cable*4 (For Rear Wheel Side)● 8.2ft Power Cable*4 (For Front Wheel Side)● Rubber Mounting Pad*8● 1 With 8 Pod Cable*2● Rock Light Hardware Kit*2● Zip Ties*52

C. CH4x4 Switch (blue, red, black, yellow and green color wires): i. Connect Blue wire to Pin 86 of Amber light relay ii. Connect Red wire to positive (+) battery terminal iii. Connect Black wire to ground or negative (-) battery terminal iv. Connect Yellow wire to dash illumination (in my case, I tapped into the white color wire of the Windshield wiper deicer switch) v. Connect Green wire to Pin 86 of White light relay

At iQ Labs, we offer high-quality, OSHA-compliant flammable cabinets that are both UL Listed and SEFA approved. Standard features include:

It’s important to note that improper venting of a flammable cabinet can result in a fire hazard. Flammable cabinets must be able to seal completely in order to smother a fire in case of emergency. Improper venting can allow oxygen to continue to enter the cabinet and feed the flames.

Here is how my Amber rock lights work with CH4x4 switch: 1) press amber switch, battery power on CH4x4 red wire goes through CH4x4 blue wire and to Pin 86 of Amber relay. The power energizes the coil of Amber relay; Pin 30 makes connection to Pin 87, turns on Amber rock lights. It will be similar situation of White rock lights. Since Pin 30 & Pin 87 of both relays will always have battery power, I can turn on the rock lights without running the vehicle, so please be careful to turn off the rock lights. In addition, the set up for the CH4x4 dual function switch allows me to turn on both Amber and White rock lights at the same time. Thank you and have a good day.