RIGID revolutionized the lighting industry with the RDS Series, the worlds first curved LED light bar. The new RDS SR-Series PRO offers the same great styling and functional advantages of the RDS-Series in a more streamlined package. The SR-Series has always provided a sleek, low-profile lighting solution that measures less than 2 inches tall.

Snow Plow LightsLED

Built with the same quality components as the rest of RIGIDs lighting products, the new RDS SR-Series PRO provides reliable and efficient lighting on demand. Own The Night with RIGID curved LED light bars. Features:

The bar offers the same quality extruded aluminum housing and unbreakable polycarbonate lens as other RIGID products, but it now packs more light output than ever thanks to PRO LEDs with more raw lumens. More than just functional, new blacked out circuit boards and promintent branding further enhance the RDS SR-Series sleek and subtle look.

WarningStrobeLights

Equipment used to apply both liquid and dry snow and ice control materials shall be calibrated before the start of the winter season and re-calibrated or verified at regular intervals during the winter season.

All snow and ice removal equipment should be thoroughly cleaned, greased and lubricated following each snowstorm and readied for the next storm when temperature conditions allow. At the end of each winter season, all snow and ice removal equipment shall be thoroughly cleaned, inspected for repairs, repaired as necessary, marked for replacement as necessary and preventive maintenance performed on the equipment to prevent rusting. The equipment shall then be properly stored.

Truckwarning lights

All vehicles that are designed to move slowly (less than 25 mph) shall be equipped with a SLOW MOVING VEHICLE emblem if expected to operate upon roadways day or night. These vehicles include owned, rented or leased tractors, motorgraders, loaders, backhoes and any other equipment that may operate on the roadways. Slow moving emblems should not be installed on salt spreaders, dump trucks and other licensed vehicles that normally operate at traffic speeds. These vehicles should use warning lights, flashing arrow panels or other warning devices when operating at slow speeds.

Construction Strobelights

Amber warning lights shall be installed on maintenance motorized equipment to warn the public and to enhance safety of MoDOT workers. Warning lights may be of various types including flashing, revolving, strobe, light emitting diode or other systems to warn traffic. In general, all vehicle warning light systems should be able to be seen 360° or adequately warn approaching traffic. Warning lights shall be visible from at least 500 ft. Use of warning light systems shall be in accordance with Missouri Revised Statutes Chapter 304 Traffic Regulations.

Each end of front snowplows should be delineated with a vertical rod, cable or other type of similar material. The delineator may include a red flag, red reflector to the rear with white reflector to the front, amber reflectors, fluorescent orange tubing, red conspicuity tape or other similar systems to mark the plow ends for operator and public recognition. Only red sections of conspicuity tape may be used on the backside of snowplows for additional identification.

Rented equipment shall have substantially the same as or better lighting than MoDOT equipment, unless protected by another vehicle with the proper warning light system.

By treating the proven design to a gentle arc, the RDS SR-Series PRO is right at home in modern bumpers, windshields, grille inserts, and other applications where a curve look is more complimentary than that of a traditional light bar. The curve is for more than just looks, it is also functional: the arc of the RDS SR-Series PRO light bar provides a wider spread of light, providing unmatched lighting coverage with a single LED light bar.