Reduction Revolution is an online store that specialises in energy efficiency. We sell products to reduce energy usage, improve comfort, save time, and cut costs.

LED carlights

Brands → Billyboil - Efergy - EGLO - enLighten - FLIR - Hue - Ledvance - Osram - Philips - Powerpal - Powersensor - Sunbeam - Verbatim - Vornado - Warmset

These lower-wattage floodlights are ideal for most residential and semi-rural outdoor lighting needs. They suit verandahs, patios, decks, pathways, driveways, sheds, carports, and building perimeter lighting.

© 2024 Reduction Revolution Pty Ltd (ABN: 74 141 672 764). We deliver nationwide and overseas from our warehouse in Sydney.

The ability to provide illumination forward of the vehicle that enhance the visibility of distant and surrounding objects makes driving lights especially useful at higher cruising speeds or in an off-road environment. Driving lights are installed on the front of the vehicle at a mounting height of not less than 12 inches nor more than 42 inches above the road surface to provide extra high beam illumination. They are typically mounted above the vehicle’s front bumper or in its grill. Aside from just being used at night to illuminate an area further and wider than the headlights are capable of, driving lights may also work as daytime running lights to improve the forward conspicuity of a vehicle to other road users in the daytime.

OSRAMautomotive

LED technology opens up completely new horizons in the design and performance of high beam auxiliary lights. LEDs are the most successful representative of SSL and has gained wide acceptance in automotive lighting. Their intrinsic characteristics, including high energy efficiency, small size, solid state durability, optical directionality, long service life, superior intensity controllability, and the capability of precise control of the spectral power distribution (SPD), lend them perfectly to vehicle forward lighting. LED driving lights come in a variety of lumen packages, beam characteristics, color options, and form factors. The high intensity light is produced typically by high power LEDs that are ceramic-based or are packaged using the CSP technology. Both ceramic-based and CSP LEDs offer high drive current capability that allows them to produce high lumen output from small optical sources. The optical distributions of the LEDs can be precisely controlled using reflectors, lenses, or a combination of them.

A laser diode operates on the similar principle as that of a phosphor-converted LED, but the carrier recombination that creates photons is dominated by stimulated emission, rather than spontaneous emission which dominates the carrier recombination in LEDs. Laser diodes deliver the highest luminance available of any light source and their light output can be easily shaped. This enables collimated beams and longer throw for directional lighting applications. Nevertheless, laser diode lighting is still fairly novel and the price of laser diode forward lighting systems can be impractically high for the consumer market. Therefore directional lighting for automotive applications is currently the realm of LED lighting.

Another important consideration is the physical size of each LED flood light. At just 8cm by 15cm, the 20W flood light is tiny compared to the 200W option, which is 30cm by 48cm. All models have a neat, slimline profile at only 3 to 4cm thick.

Street legalDriving lights

LEDs are current driven devices. A driver circuit is needed to regulate the power to the LEDs. The LED driver is often required to accommodate a wide input voltage range such as 9-36 VDC due to the presence of voltage fluctuations in vehicle electrical systems. An LED driver responds to the changing drive current needs of the LEDs due to variations in forward voltage across the semiconductor junction of the LEDs.

Did You Know? The Philips 50W LED flood light is brighter than an old-fashioned 500W halogen flood. So, be careful not to over-spec your outdoor lighting - these are bright despite their seemingly low wattage.

The Philips SmartBright 'All-in' Floodlights are bright, dependable, and energy-efficient. Available in four wattages - 20W, 50W, 100W, and 200W - these flood lights are perfect for both residential and commercial applications.

LED working Light

© 2024 Reduction Revolution Pty Ltd (ABN: 74 141 672 764). We deliver nationwide and overseas from our warehouse in Sydney.

All points of entry and material transition of the luminaire assembly are hermetically sealed to resist the ingress of moisture, dust, contaminants and insects. Some products are equipped with a pressure equalizing vent which is used to eliminate pressure build-up (expansion) and vacuums (collapsing) caused by rapid heating and cooling cycles.

Lazer light

Ryan has been very helpful in sorting out delivery issue. It turned out to be AusPost's fault. The 20W light is tiny but appears brighter than the 150W halogen floodlight it replaced. Due to the LED array being more sparse compard to the fixed colour temperature model, you will see the 'ray effect' when looking from near the beam edge. But the area is evenly lit. The 3-colour switch is handy as I use different colours in different area of the house.

Driving lights are dedicated auxiliary lights that are designed as self-contained lighting systems in a round, cube, rectangular, or linear form. Traditional high beam auxiliary lights produce directional beams of light using omnidirectional light sources such as halogen and HID (xenon) bulbs. These light sources are energy hungry devices that can cause the vehicle electrical to struggle under a heavy load. The glass bulbs are fragile when exposed to repeated mechanical shocks or vibrations. The xenon short-arc lamps are capable of producing an intense beam of cool white light for effective long-range illumination. However, the pressurized gas contained within the bulb is a risk factor. Xenon lamps have a very short lifespan (500 to 1,500 hours). An alternative farfield lighting technology to xenon-based HID lighting is solid-state lighting (SSL) based on laser diodes.

Solder joint reliability is of critical importance to the entire lighting system because vehicles traveling at a high rate of speed or on off-road terrains also cause repeated, high amplitude vibration. The creep resistance of the solder is also an influential factor in minimizing failures in solder joints as a consequence of strains incurred in thermal cycling that commonly occurs in outdoor environments. The LED module is protected by a polycarbonate lens which is impact resistant and UV stabilized.

Some situations, like perimeter or signage lighting, may benefit from several lower-wattage floodlights spaced out eveningly rather than a single high-wattage option.

LEDDriving Lights

The Philips flood lights on this page are our most popular. For other options, including smart floodlights and portable work lights, see our complete range of LED floodlights. For road or area lighting, see our LED street lights, which are best suited to replace existing pole-mounted lights.

Yes, these LED floodlights look similar to the previous Philips BVP151 range. They differ from previous options in three key ways:

These higher-wattage LED floodlights are typically used in commercial, large-area, or high-brightness applications. They are best suited to higher mounting - whether pole-mounted or on the side of a building. They are often used in parking areas, industrial estates, and sporting practice areas.

LED driving lights offer a number of decisive advantages over conventional lamp-based driving lights, but the unique operating characteristics of LEDs pose challenges to system integration. LEDs perform to their full capacity only when the junction temperature, drive current, and environmental conditions are properly controlled. The housing of an LED driving light is generally constructed from die cast aluminum which provides ruggedness to withstand harsh off-road conditions and high thermal conductivity required for efficient heat dissipation. Cooling fins are often cast into the rear of the housing to increase the surface area of the heat sink for maximized heat dissipation by convection. The LED module is an array of high power LED packages soldered on a metal core printed circuit board (MCPCB). It is attached to the heat sink in full interfacial contact for a low thermal impedance. A thermal interface material (TIM) is placed between the MCPCB and heat sink to minimize the interfacial contact resistance.

LEDDrivingLight

High reliability in automotive applications calls for the use of protection circuitry against overvoltage, undervoltage, reverse polarity, overcurrent, and other faults conditions. A switching regulator is essential if the supply voltage has a wide variation and high circuit efficiency is important. However, the tight EMI specifications impose special considerations in the design of LED power supplies for vehicle lighting applications. A simple linear regulator could be used to meet the electromagnetic compatibility (EMC) requirements, provided that the supply voltage is always higher than the LED forward voltage.

Yes, you can ask your electrician to wire in a motion sensor for use with any of these LED flood lights. We recommend this outdoor motion sensor, which is also available in black.

Driving lights are forward lighting devices designed to supplement the high beam of a standard headlight system. They illuminate the road over a long distance and/or a wide area to improve visibility of the road ahead. By providing illumination over areas that are beyond the reach of high beam headlights, high beam auxiliary lights could thus offer an enhanced level of safety never achieved with the standard headlight system alone. The extended range of illumination makes it easy for vehicle drivers to identify hazards long before they would be seen with high beams only and execute evasive action in a sufficient time.

Helladriving lights

LED driving lights are available in pencil (spot) beams and spread (flood) beams. The pencil beam is designed for long-throw illumination which is often required by off-road vehicles which should give drivers sufficient perception-reaction time by providing improved visibility of objects or obstacles at great distances. The spread beam is intended to illuminate both the area immediately in front of the vehicle and some distance ahead for operators of road vehicles (e.g., cars, trucks and buses) who desire fatigue-free driving more than recognizing objects at a far distance. LEDs afford an opportunity to efficiently extract light directly from the source and precisely controlled the light for the desired distributions. The use of total internal reflection (TIR) optics, in particular, allows to create very tight spot beams with FWHM divergence as small as 3 degrees.

A switch on the back of each flood light allows you to switch between Warm White (3000K), Neutral White (4200K), or Cool White (6500K) colour temperatures.

The standalone motion sensors we sell use a '3-wire' configuration. If you use a '2-wire' sensor, the floodlight may remain dimly lit when off due to the sensor's leakage current.