Machines are an integral part of many businesses, but they also come with significant injury risk, especially when they are not in good working condition. Keep tags on hand that will alert employees when a machine is not operating or should not be turned on for any reason. Without the proper machine safety tags, a worker could fire up a faulty machine without knowing it and cause injury to themselves or others in the area.

Out of Service Tag

Although safety tags are less than 6 inches tall, they can have a big impact in your workplace. Proper tagging throughout your facility is a key component of a safety program. Not only do tags communicate vital information, they are required by OSHA regulations and can save your company a lot of money in fines.

CautionTags

Regular equipment inspections reduce the chances of equipment failure and worker injury – and help ensure your equipment will be ready for use when needed. But, you need to keep track of your inspections, so you know when they are done and what the results are for each one.

RepairTags

OSHA citations for ladder or scaffolding violations can cost $13,000. Additional fines are added for each day past the deadline to remedy the issue. Having the proper type of tags in place improves communication and reduces the risk of improper use of ladders and scaffolding, which reduces your risk of a hefty fine.

Dangerous areas require the use of “Do Not Enter” signs. Without them, unsuspecting people may wander into an area and put themselves in great danger. One example of such an area would be a construction zone. If the area isn't blocked off, it may be difficult for someone to know that the area is dangerous. Maybe it doesn't look threatening so it can be tempting to walk around the area and see what's going on. It's especially tempting for kids because it can look like a lot of fun. Kids want to look at all the heavy equipment, play on the dirt pile and jump off the foundation. But, what most people don't realize is that construction zones have a lot of hidden dangers. For construction areas and other similar areas, it is necessary to use “Do Not Enter” signs. Even though it is impossible to physically monitor a site continually, you can warn people to stay away by posting a sign. If it is your property, then it's your responsibility to post the sign to warn others of the danger and attempt to keep everyone safe.

Inspection tags make it easy. These types of safety tags are made so you can identify the piece of equipment, the location, as well as the date of each inspection, and the name of the person who signed off on it.

Some items, like portable fire extinguishers, are required to have an annual maintenance inspection. Others, like forklifts, need daily inspections. Keeping inspection tags on hand and on equipment is an easy way to keep track of when each item is inspected and by whom.

A common place to see “Do Not Enter” signs is on the roadway when you are driving. This sign is so important that in many jurisdictions, you're required to obey this sign to pass your driver's test. Failure to do so means an automatic failure. When you see this regulatory street sign it means that you're about to face opposing traffic and that you'll be going the wrong way. Failure to obey these signs could have disastrous consequences if not death. If you're entering a highway going the wrong way, you're at a high risk of having a head-on crash which can be deadly, especially since the traffic coming at you will be coming at a high rate of speed. You are likely to encounter these road signs at on-ramps to highways and one-way streets. It is especially important to pay close attention to these street signs when you see them to avoid disrupting the flow of traffic or even worse, a traffic collision.

DangerTags

By adding barricade tags, you can alert workers to the reason the barricade is there, who is authorized to enter, and who is in charge of the barricade should there be any questions.

When you hear “Safety tags” you probably think of lockout/tagout tags. But that’s only a part of the picture. There are a variety of different safety tags that can help you properly communicate everything from dangerous equipment to ladder inspections to fire extinguisher records. ComplianceSigns.com has the safety tags you need for any situation.

Working in confined spaces adds an extra level of danger. That’s especially true if that space has one of the following OSHA recognized hazards:

“Do Not Enter” signs are used for a variety of situations. Regulatory signs are red and white and are extremely important as they are road signs that warn you that traffic will be coming at you if you enter. You may also notice these signs at facilities that contain a restricted area. Dangerous zones will also contain these signs and these are often located on open property that one could easily enter if such signs were not posted. This could mean someone unknowingly entered a dangerous area. If you see a “Do Not Enter” sign, whether it be street signs or for a restricted area, such as a construction zone or inside a facility, then it is best to obey the sign to ensure your safety. Specific reasons to use these signs include the following:

Scaffolding and ladders came in #3 and #6 on OSHA’s most commonly cited violations for 2019. Ladder and scaffold tags are a big part of the solution. These tags communicate to employees which ladders and scaffolding have been inspected, which are safe to use, and which are unsafe.

When you think about your overall safety program, do you think about communication? Communication is a key element to proper safety. Some of the most overlooked methods of safety communication are different types of safety tags.

Barricades serve a simple purpose, to keep people out of a restricted area. Barricade tags are a great way to add a little more information to the situations.

That’s where lockout-tagout (LOTO) tags come in. Lockout/tagout tags let other workers know that the machine is currently being serviced and that they should not try to turn it on.

Whether a “Do Not Enter”sign is posted on a property, in a building or a street sign, it is always wise to listen to what the sign is telling you. Failure to do so can put you and others in danger and could even pose a death threat. Just remember that the sign is there for a reason. It is to keep you away from danger. Even if the area doesn't look risky but there is a “Do Not Enter” sign, do just as it says and stay away.

If you see a “Do Not Enter” sign in any facility, you should obey the sign. It is there for a good reason. Failing to obey the sign can put you or others in danger. If you're in a facility, such as a hospital, you are likely to see these signs posted in restricted areas. Only authorized personnel are allowed to enter such areas. These areas may be restricted because they are dangerous or hazardous. The laboratory in a hospital is restricted because it contains harmful chemicals and biological hazards. If there were no signs to tell you to stay out of that area, you might walk right into the laboratory where you'd be exposed to chemical or unknown diseases. Other areas, such as offices, might be restricted because they contain sensitive and confidential data. Although there is no direct danger involved, it is still necessary to post a “Do Not Enter” sign so that you can keep the area secure.

Orders take 2-10 business days to ship. Specialty items such as LED Flashing Signs and Roll-Up Signs have extended lead times listed on the product page. Learn more about our shipping and return policy.

A confined area meeting any of these criteria must be identified by the employer who is obligated to inform employees who may be exposed, of the existence and location of such spaces and their hazards.

From equipment inspections to confined spaces, these 6 different types of safety tags help to keep your team safe and your workplace free from costly accidents.

The purpose of “Do Not Enter” signs is to keep people safe from potential hazards. If you see such a sign, you should always obey it. Failure to do so can leave you with disastrous consequences. Without “Do Not Enter” signs, preventable accidents will happen and could even mean a lawsuit for you if it happens in your facility or on your property. If you are overseeing a dangerous area that only certain people should have access to, then it's your responsibility to post “Do Not Enter” signs to warn the general public to stay out. You'll see these signs in a variety of settings, such as facilities, danger zones and while you're driving.

Most companies have machines. And, like all machines, that equipment needs work from time to time. It may be a significant project, or it could be a simple maintenance issue. In either case, you will shut down equipment and machinery for someone to work on it safely.

Falls are one of the most common causes of workplace injuries. Improperly used, constructed, or maintained ladders and scaffolding are accidents waiting to happen.

If you think of safety tags and your mind jumps to lockout/tagout procedures, that’s good! Those are very important tags to have and to use. But, there are other tags that you need in the workplace. Here are six types of safety tags you need and why they’re important.

In 2019, lockout/tagout was the 4th most commonly cited violation by OSHA. The penalty for lockout/tagout citations in 2019 was as much as $13,260 per violation. Additional fines of up to $13,260 are added per violation per day past the deadline to fix the issue.