Ram 25003rd brakelight

Step 4: Take a pair of spring washers and insert each piece in the screws that are sticking out from the sides of the LED light bar. Then position the LED light bar in between the mounting brackets. You will be able to insert it in between the gap of the bumper by carefully angling it. Use the nuts and screw them in from the other side of the mounting bracket to tighten the LED bar. The entire LED assembly will span the bumper opening of the Dodge RAM at 32" long.

Ram1500Light BarMount

iJDMTOY.com automotive lighting was founded in 2004 and is now one of the largest car &truck LED lighting retailers in the United States. Our company is located in the suburb of Los Angeles, California, with the most complete LED lights and accessories for all cars and trucks including LED headlights, tail lamps, LED daytime running lamps, foglamps, off-road truck lightings, LED light bars, LED strip lights..... Read More>>

Unsure of which configuration works best for your application? No problem. We did the research for you! Use the drop-down to see the different configurations that we have put together to cover the most popular lighting styles.

Ram 2500LEDLight barBumper mount

Step 1: Remove four bolts that are holding onto the original tow hook on the lower bumper area for both sides. Take off the existing tow hook. If your trim does not have an existing tow hook, there are still pre-drilled holes that you can use to mount back the mounting bracket.

5th GenRam light bar

The Unite Modular LED Light Bar System brings lighting power and customizing to the forefront by allowing you to build your light bar with endless configuration possibilities. The build process begins with our new quick-connect mounting rail system that allows you to easily slide on and swap around the modules you choose. The light rail is offered in  6”-50” lengths.

When you initially bolt the mounting bracket into your lower bumper location, try to loosely screw in the bracket without tightening the screws so you can have a tentative mounting location. The oval openings allow for about 1" leeway per side (total of about 2 inches) for a snug fit after all the components have been screwed in. Because of the oval opening design, the mounting brackets will have a little bit of wiggle room to allow you to properly mount the LED light bar in between.

All manufacturer names, symbols, and descriptions used in our images and text are solely for identification purposes only. It is neither inferred nor implied that any item sold by iJDMTOY is a product authorized by or in any way connected with any manufacturers.

All manufacturer names, symbols, and descriptions used in our images and text are solely for identification purposes only. It is neither inferred nor implied that any item sold by iJDMTOY is a product authorized by or in any way connected with any manufacturers.

Step 2: Place the bracket behind each tow hook with the light tab towards the inside. Step 3: Place your tow hooks over the mounting brackets. Use the longer screws to bolt and secure the metal mounting brackets and the tow hooks to the lower bumper location.